Overview

The DL2000 is optimized for efficiency, density and flexibility and a server node can be serviced individually without impacting the operation of other server nodes sharing the same chassis. The DL2000 consists of up to 4 independent DL170e G6 servers in the 2U HP ProLiant e2000 G6 Chassis. The servers share power supplies and fans, providing greater power and cooling efficiencies.

The DL2000 was designed to double the density to maximize data center floor space, increase performance while lowering energy consumption and provide flexible configurations that fit into existing industry standard racks.

Each DL170e G6 server node supports up to two Intel® two processors and 16 DDR3 DIMM sockets. The DL170e G6 provides all of the features expected in an enterprise server, including essential management features (LO100i) and Easy Setup for rapid deployment, but at a low cost.

4 Node 24 SFF HDD Model Illustrated

 

Front View:	Rear View:
1. 1U Node PCIe Riser - Low Profile PCIe x16 Gen2 Slot	1. Common Slot Power Supply
2. Intel® Xeon® 5500 or 5600 series processors (supports up to two per node)	2. Power supply cable socket
3. Common Slot Power Supply (two supported per chassis)	3. Low-Profile PCI Express x16 Gen2 slot
4. 4 x 80mm system fans	4. Optional dedicated management port (RJ-45)
5. Standard Right Power Buttons, Chassis UID, Health LEDs	5. Two USB ports
6. Standard Left Power Buttons, Health LEDs	6. One GbE LAN port (RJ-45)
7. 16 DDR3 DIMM slots	7. One GbE LAN port with shared management (RJ-45)
	8. Power Button
	9. Health LED
	10. UID Button
	11. Serial Port
	12. Video Port

 

What's New

Support for new options

NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section.

Processor Six-Core Processors

One of the following Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor depending on Model

Intel® Xeon® X5660 (2.80GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor

Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor

Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor

Intel® Xeon® E5645 (2.40GHz/6-core/12MB/80W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W, DDR3-1333, HT, Turbo 2/2/3/3/4/4) Processor Four-Core Processors

Intel® Xeon® E5620 (2.40GHz/4-core/12MB/80W, DDR3-1066, HT, Turbo 1/1/2/2) Processor

Intel® Xeon® L5630 (2.13GHz/4-core/12MB/40W, DDR3-1066, HT, Turbo 1/1/2/2) Processor

Intel® Xeon® E5607 (2.26GHz/4-core/8MB/80W, DDR3-1066) Processor

Intel® Xeon® E5603 (1.60GHz/4-core/4MB/80W, DDR3-1066) Processor

NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost

Technology, with 6, 5, 4, 3, 2, and 1 cores active.

NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.

NOTE: For the Intel 5000 Series, the letter preceding the model number indicates the performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise Performance/Wattage (Mainstream), and "L" denotes Lower Wattage.

NOTE: Up to 2 processors supported. Mixing different processor models is not supported.

Cache Memory	12MB (1 x 12MB) Level 3 cache NOTE: All 5600 processor models except those noted below. 8MB (1 x 8MB) Level 3 cache NOTE: For processor E5607. 6MB (1 x 6MB) Level 3 cache NOTE: For processor E5603.
Chipset	Intel® 5520 Chipset NOTE: For more information regarding Intel chipsets, please see the following URL: http://www.intel.com/products/server/chipsets/
Upgradeability	Upgradeable to two processors (12 cores)
Memory Protection	Advanced ECC (multi-bit error protection) Mirroring mode Lockstep mode

Memory Type DDR3 Registered (RDIMM) and Unbuffered (UDIMM)

Maximum (RDIMM) (per 192GB (12 x 16GB) PC3-8500R (DDR3-800) server node)

Maximum (UDIMM) (per 48GB (12 x 4GB) PC3-10600E (DDR3-1333) server node)

NOTE: Depending on the memory configuration and processor model, the memory speed may run at

1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at http://www.hp.com/go/ddr3memory-configurator

 

Network Controller HP NC362i Integrated Dual Port Gigabit Server Adapter

Expansion Slots Half Height Nodes (1U): One available PCI Express Gen 2.0 slots:

Slot 1: Low profile PCI-Express 2.0 x16

Full Height Nodes (2U): three available riser options

Option 1: Up to three available PCI-Express Gen 2.0 slots: Slot 1: full-height/full-length PCI-Express 2.0 x16

Slot 2: full-height/half-length PCI-Express 2.0 x4

Slot 3: low-profile PCI-Express 2.0 x4

Option 2: Up to three available PCI-Express Gen 2.0 slots: Slot 1: full-height/full-length PCI-Express 2.0 x8

Slot 2: full-height/half-length PCI-Express 2.0 x8

Slot 3: low-profile PCI-Express 2.0 x8

Option 3: Up to two available PCI-Express Gen 2.0 slots:

		Slot 1: full-height/full-length PCI-Express 2.0 x16
		Slot 3: low-profile PCI-Express 2.0 x8
Full-height PCIe Riser Option	Expansion Slots #	Technology	Bus Width**	Connector Width*	Bus Number	Form Factor	Notes
	1	PCI-Express 2.0	x16	x16	4	Full height, full length	3.3 volts
	2	PCI-Express 2.0	x4	x4	6	Full height, half length	3.3 volts
	3	PCI-Express 2.0	x4	x4	7	Low Profile	3.3 volts
Full-height PCIe Riser Option	Expansion Slots #	Technology	Bus Width**	Connector Width*	Bus Number	Form Factor	Notes
	1	PCI-Express 2.0	x8	x8	4	Full height, full length	3.3 volts
	2	PCI-Express 2.0	x8	x8	5	Full height, half length	3.3 volts
	3	PCI-Express 2.0	x8	x8	7	Low Profile	3.3 volts
Full-height PCIe Riser Option	Expansion Slots #	Technology	Bus Width**	Connector Width*	Bus Number	Form Factor	Notes
	1	PCI-Express 2.0	x16	x16	4	Full height, full length	3.3 volts
	3	PCI-Express 2.0	x8	x8	6	Low Profile	3.3 volts
Half-height PCIe Riser (Standard with half-height 1U nodes)	Expansion Slots # 1	Technology PCI-Express	Bus Width** x16	Connector Width* x16	Bus Number 4	Form Factor Low Profile	Notes 3.3 volts

2.0

* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.

** Indicates the number of physical electrical lanes running to the connector.

 

Storage Controller Non-Hot Plug SATA Models Embedded HP Smart Array Hot Plug Advanced Pack for B110i (RAID 0, 1, 10) NOTE: Transfer rate: up to 3 Gb/s SATA

NOTE: To enable RAID on Embedded SATA (Windows and Linux only), use the

HP Smart Array B110i SATA Raid controller, To enable use of the B110i, enter the ROM based setup utility(RBSU). The option for enabling RAID can be found in the advanced section of the RBSU. For additional details www.hp.com/go/SATARAID. For RAID on Solaris, a Smart Array Controller must be purchased.

Hot Plug SATA Models Embedded HP Smart Array Hot Plug Advanced Pack for B110i (RAID 0, 1, 10) NOTE: Transfer rate: up to 3Gb/s SATA

NOTE: The HP Smart Array B110i SATA Raid Hot Plug Advance Pack provides the hot-plug and RAID support for the embedded SATA controller. The Hot Plug Advance kit is a License to enable the RAID support on Hot Plug models. It supports up to six 3G SATA hard disk drives. It will support a maximum of two

(2) logical drives. It supports Raid 0, 1 and 1+0. For additional details

www.hp.com/go/SATARAID

Hot Plug SAS/SATA Models HP Smart Array Controller RAID 0,1,10, 5

NOTE: Transfer rate: up to 6GB/s SAS, 3Gb/s SATA

NOTE: SAS Upgrade: A HP Smart Array Controller is required for SAS HDD support. Transfer rate: 6.0 Gb/s SAS supported.

NOTE: If a Smart Array P410 Controller is added after initial purchase (e.g. an upgrade) a HP DL170e G6

P410 CONTROLLER CABLE OPTION KIT (P/N 612206-B21) must be ordered to connect the Smart Array Controller to the adapter board.

NOTE: If any Smart Array Controller other than the P410 is added after initial purchase (e.g. an upgrade), an HP DL170e G6 SMART ARRAY CONTROLLER CABLE OPTION KIT (P/N 612207-B21) must be ordered to connect the Smart Array Controller to the adapter board. NOTE: An external diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced Pack is needed to install storage controller drivers during a Windows operating system installation from a CD.

 

Internal Storage Devices	Diskette Drives	Via USB only
	Optical Drives	DVD drive via USB only (External support only)
	Hard Drives	None ship standard
	Drive Bays One of the following depending on Model	Up to 8 or 12 Hot plug SAS/SATA 3.5" drives Up to 16 or 24 Hot plug SAS/SATA 2.5" drives

NOTE: The 12 LFF HDD cage is available for special large volume configurations only. Please contact your HP representative for details.

Maximum Internal Storage	LFF 3.5" Hot Plug SATA LFF 3.5" Hot Plug SAS	24.0TB 24.0TB	8 x 3TB * 8 x 3TB
	LFF 3.5" Hot Plug SATA	36.0TB	12 x 3TB *
	LFF 3.5" Hot Plug SAS	36.0TB	12 x 3TB
	SFF 2.5" Hot Plug SATA	16.0TB	16 x 1TB
	SFF 2.5" Hot Plug SAS	16.0TB	16 x 1TB
	SFF 2.5" Hot Plug SATA	24.0TB	24 x 1TB
	SFF 2.5" Hot Plug SAS	24.0TB	24 x 1TB
	NOTE: The 12 LFF HDD cage is available for special large volume configurations only. Please contact your HP representative for details. NOTE: To support HP hard drives exceeding 2.2 TB, a HP Smart Array Controller is required.
Interfaces	Serial Network RJ-45 (Ethernet)	1 2 10/100/1000 NIC ports (1 NIC shared for the HP ProLiant Lights Out 100i Remote Management)
	Graphics Management	1 1 Optional Dedicated LO100i Management Port
	Health LED	2 (1 front and 1 rear) per server node
	Power	2 (1 front and 1 rear) per server node
	UID	1 rear per server node and 1 upfront system UID
	USB	3 (two rear, one internal)
Industry Standard Compliance	ACPI V2.0 Compliant PCI 2.2 Compliant PXE Support WOL Support Microsoft® Logo certifications IPMI 2.0, DCMI 1.0. SMASH CLP compliant

Graphics Integrated Matrox Graphics G200e, 32MB Standard

16 bit color: maximum resolution of 1600 x 1200

32 bit color: maximum resolution of 1280 x 1024

The following NVIDIA graphics cards are tested for compatibility in the DL2000 (when using full-height 2U nodes):

NVIDIA Quadro 6000 6GB PCIe x 16 graphics card

NVIDIA Quadro FX5800 4GB PCIe x 16 graphics card

NVIDIA Quadro 4000 2GB PCIe x 16 graphics card

NVIDIA Quadro FX3800 1GB PCIe x 16 graphics card

NOTE: For more information on the latest visualization and acceleration qualification status, please see http://www.hp.com/go/accelerators

NOTE: An HP DL170e GPU Adapter Kit (P/N 612253-B21) is required when installing this NVIDIA card. The

NVIDIA cards can only be installed in the 2U node with the 2 slot full-height riser option: HP DL170e I/O Riser PCIe x16 x8 FIO option (P/N 512481-B21).

 

Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard

NOTE: HP ProLiant DL servers are primarily connected to PDU's in data center racks so they ship standard with only a PDU power cord (416151-B21).

NOTE: Japan CTO configurations get the 6' 4165151-291 power cord in addition. China CTO configurations get the 6' 416151-AA1 power cord in addition.

NOTE: If customers require a local power cord, they can check the power cord matrix for the appropriate cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix

 

Advanced Power Management: Power Management Controller

In addition to the efficiencies gained by the shared power infrastructure, the DL2000 contains advanced power metering and capping capabilities. The embedded Power Management Controller (PMC) is able to monitor power consumption and throttle the speed of the processors and memory in each node within the chassis in order to maintain a pre-set power budget. HP provides a simple command-line utility, called HP ProLiant Power Interface Control (PPIC) Utility, for reading and configuring the power control logic of the server nodes. Versions are available for MS Windows Server OS (2008 and 2008 R2) and Linux OS (RHEL5 and SLES11) with the requirement that the OS IPMI Driver be installed. The following Power Management modes for power redundancy are standard and are configurable in the controller:

No Redundancy - power control disabled. No power throttling will occur.

(DEFAULT) AC Redundancy with Throttling. This mode allows all nodes to share both power supplies and run at maximum performance. Power control logic will only throttle the performance of each node when the power draw by the chassis attempts to exceed the load supported by the power supplies. In this mode, the box is expected to survive an unexpected AC Power loss to one of the power supplies.

Full AC/DC Redundancy - power control logic will maintain a power cap value for the chassis at the DC rating of a single power supply (750W, or 1200W), such that if one power supply experiences a DC or AC failure, the chassis should remain on-line and operational.

Power Capping is included with the LO100 Advanced Pack:

Power Capping - User specifies the power envelope for the 2U chassis, within the capabilities of the hardware installed. Users run a utility to calibrate the minimum and maximum power consumption envelope for the chassis. In order to avoid any impact to performance due to throttling, a User selectable Power Cap value should not be set below the minimum power value provided by the utility.

Power Supply	HP has a new design for ProLiant power supplies - the new Common Slot power supply bay. This design provides the customer with commonality in power supplies across multiple platforms to save on the cost of spares and allows HP to offer multiple power solutions to fit the customers' needs. Many HP ProLiant Servers come with high-efficiency Common Slot power supplies. The new HP Common Slot power supplies are designed for the highest power efficiency without degrading performance of the ProLiant server. These power supplies have efficiency ratings up to 94%. There are multiple power supply options available allowing you to "right-size" the most appropriate power supply for your server configuration. To make sure you select the correct power supply to meet your configuration, please use the HP Power Advisor at: www.hp.com/go/hppoweradvisor. All HP Common Slot power sources are UL, CE mark compliant, hotplug, and support Redundant Power Management: In addition to the shared power and cooling infrastructure, the DL2000 contains advanced power metering and power capping technologies. The Power Interface Controller allows you to configure the system for full AC redundancy or AC redundancy with power throttling, depending on your configuration. With the optional Dynamic Power Capping mode, the DL2000 can boost the capacity of your data center by reclaiming trapped power and cooling capacity. HP offers several Common Slot Power Supply Options for this platform. NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the computer industry, and consumers in an effort to bring energy efficient technology solutions to the marketplace. 80 Plus independently tests power supply efficiency and publicly posts the results on 80Plus.org. Optional power supplies can be purchased through power supply option kits (see Power Supply Options for part numbers). NOTE: Mixing of power supplies in the same chassis is not supported. All power supplies must be of the same type, all, 750W 94%, all 1200W 94%, or all 1200W 90%. If non-matched power supplies are inserted you will get errors and operation will fail.
System Fans	4 x 80mm system fans ship standard; Non-hot plug, Non-redundant.
Required Cabling	For required cabling information, refer to the HP Web site at: www.hp.com/servers/dl170e.
Operating Systems and Virtualization Software Support for ProLiant Servers	Microsoft Windows Server Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) Oracle Solaris VMware ESX Citrix XenServer NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server including how to purchase from HP, please visit our OS Support Matrix Site at: http://www.hp.com/go/ossupport

Form Factor HP ProLiant e2000 G6 Chassis - 2U Chassis can support up to four DL170e server nodes in the 2U chassis.

HP ProLiant DL170e G6 Server - Half-width system board. Half-height (1U) or full-height (2U) depending on riser option selected.

HP offers four different drive cages for the 2U HP ProLiant e2000 G6 Chassis

8 LFF HDD Cage

12 LFF HDD Cage

NOTE: Available for special large volume configurations only. Contact HP representative)

16 SFF HDD Cage

24 SFF HDD Cage

The 2U chassis can support two server node configurations:

Two full height nodes

Four half-height nodes

Server Node Blanks

If a server node is removed for a period, a blank must be installed to maintain the thermal environment in the chassis. It is okay to leave a node in the chassis powered off to be serviced in the future. But once a DL170e node is removed for servicing, a HP DL2000 Server Node Blank Kit is required. The blank is a 1U blank so two blanks are needed for a 2U node.

4 Node Configuration - Front View

 

NOTE: For 2 node configurations, 2U nodes are ordered and are numbered 1 and 3. NOTE: Additional nodes cannot be added later to 2 node configurations.

 

Embedded Manageability HP ProLiant Lights-Out 100 HP Lights-Out 100 with Optional LO100 Advanced Licenses for Virtual KVM and Virtual Media.

Standard Features:

IPMI 2.0, DCMI 1.0, and SMASH CLP support

Configuration via ROM Setup Utility or LO100cfg utility

USB 2.0 support for virtual media for much faster transfer speeds Enhanced browser interface and embedded KVM over IP provides OSindependent remote graphical console

24x7 Technical Support and Update (TSU) 1 year support and license upgrades included in Advanced license

For more information, see: www.hp.com/go/lo100.

 

Security Power-on password Setup password

Diskette boot control

Secure Sockets Layer (SSL)

Secure Shell (SSH)

 

Warranty This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

NOTE: For Americas and EMEA, Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. For APJ, Server Warranty includes 3 year Parts, 3 year Labor, 3-year onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.

HP Insight management HP Insight Control HP Insight Control, a product option, delivers essential infrastructure

Service and Support HP Technology Services for Industry Standard Servers and BladeSystem

Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.

What HP ProLiant and BladeSystem Services can do for you

HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support, and manage IT and infrastructure solutions. This way, HP proposes services solutions that include more than just uplift of base warranty. You can get the support you need by choosing from one of a number of service packaged solutions we have designed to address wider set of customer support needs:.

HP Technology Services meets business challenges with services offered in three packages - Optimized Care Package, Standard Care Package, and Basic Care Package - available for each product group. Such packaged solutions enable customers to optimize technology operations, minimize risk and drive better business outcomes with easy-to-buy, easy-to-use scalable support packages for servers, storage, networking and software.

 

Optimized Care Optimized Care Package: Supports maintaining servers at optimum performance availability

HP ProLiant Server Hardware Installation

Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner. http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN

HP Installation and Startup for Insight Control Software

Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL series servers or HP BladeSystem servers. http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf

HP Proactive Care 24x7 Service

HP recommends Proactive Care for your scalable servers to prevent problems with proactive advice and assistance, resolve issues and rapidly recover by connecting to HP's enhanced call experience and advanced technical expertise.

 

Standard Care Standard Care Package: Package that maintains high level of server availability

HP ProLiant Server Hardware Installation

Provides for the basic hardware installation of HP branded servers, storage devices and networking

options to assist you in bringing your new hardware into operation in a timely and professional manner http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN

HP Installation and Startup for Insight Control Software

Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL series servers or HP BladeSystem servers http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf

HP Proactive Care Next Business Day Service

This services combines next-business-day onsite hardware reactive support with proactive services and enhanced access to call specialists to manage and prevent problems.

3-Year , HP 24x7 Software Support for Insight Control

Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL series servers or HP BladeSystem servers http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf

Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat) & VMware Installation & Start Up, and

Software Support; Install and Startup Services for Insight Control; Microsoft or Linux or VMware education courses; +30 Proactive Select Credits, Factory Express

 

Basic Care Basic Care Package: delivers minimum recommended support service level

HP ProLiant Server Hardware Installation

Provides for the basic hardware installation of HP branded servers, storage devices and networking

options to assist you in bringing your new hardware into operation in a timely and professional manner http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN

HP Installation and Startup for Insight Control Software

Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL series servers or HP BladeSystem servers http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf

HP Foundation Care Next Business Day Service

HP Foundation Care Next Business Day connects you to HP during business hours for assistance on resolving issues - features next business day hardware onsite response and software call back within two hours after opening your case. Make HP your first call for hardware or software questions; Collaborative Support is included in all Foundation Care Services for this product and provides troubleshooting assistance on software such as Microsoft Server, Red Hat Linux, VMware and more. Three years' coverage recommended with HP Care Pack Service.

3-Year , HP 24x7 Software Support for Insight Control

Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL series servers or HP BladeSystem servers http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf

Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat) & VMware Installation & Start Up and

Software Support); +10 Proactive Select Credits, Factory Express

 

Insight Remote Support The packages include HP Insight Remote Support that uses proven technology to deliver secure, reliable 24x7 remote monitoring, diagnoses, and problem resolution. It is available at no additional cost to all warranty, HP Care Pack Service, and service agreement customers.

 

For more information To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales

representative or HP Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.

NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis.

NOTE: FIO indicates that this option is only available as a factory installable option.

Step 1: Base Configuration (choose one from each list unless otherwise noted)

HP Chassis	HP ProLiant e2000 G6 Configure-to-order Chassis	609326-B21
HP Drive Cage Options	HP 8 LFF DL2000 FIO Hard Drive Cage with Backplane Kit	611431-B21
	HP 16 SFF Hard Drive Cage/Backplane DL2000 FIO Kit	611433-B21
	HP 24 SFF Hard Drive Cage/Backplane DL2000 FIO Kit	611434-B21
	NOTE: for configurations with the 12 LFF HDD Cage, please contact your HP representative.
HP Rail Kits	HP DL2000 Hardware Rail Kit NOTE: 2U rail kit used for HP or 3rd party racks - allows addition of one e2000 chassis at a time.	611428-B21
	HP 10U Bulk Rail 2U Kit NOTE: 10U rail kit used for HP racks ONLY - allows addition of five e2000 chassis at a time.	612901-B21
HP Drive Cage Cable Kits	NOTE: Required Drive Cage Cable kits for the DL2000. These cables connect the midplane to the drive backplane and are based on the drive cage used and the number of nodes.
	2 Node 8LFF Configurations - order the following cables to connect the midplane to the drive backplane:
	HP Mini-SAS to SATA 20/25/29cm FIO Cable Kit NOTE: Quantity 1 per chassis.	612256-B21
	HP Mini-SAS to SATA 25/20/29cm FIO Cable Kit NOTE: Quantity 1 per chassis.	612257-B21
	HP Mini-SAS to SAS 160mm A FIO Cable Kit NOTE: Quantity 1 per chassis.	630874-B21
	HP Mini-SAS to Mini-SAS 33cm FIO Cable Kit NOTE: Quantity 1 per chassis.	612255-B21
	2 Node 16SFF Configurations - order the following cables to connect the midplane to the drive backplane:
	HP Mini-SAS to Mini-SAS 25cm FIO Cable Kit NOTE: Quantity 1 per chassis.	612254-B21
	HP Mini-SAS to Mini-SAS 33cm FIO Cable Kit NOTE: Quantity 2 per chassis.	612255-B21
	HP Mini-SAS 45cm FIO Cable Kit NOTE: Quantity 1 per chassis.	625805-B21
	2 Node 24 SFF Configurations - order the following cables to connect the midplane to the drive backplane:
	HP Mini-SAS to Mini-SAS 25cm FIO Cable Kit NOTE: Quantity 4 per chassis.	612254-B21
	HP Mini-SAS to Mini-SAS 33cm FIO Cable Kit NOTE: Quantity 3 per chassis.	612255-B21
	HP Mini-SAS 45cm FIO Cable Kit NOTE: Quantity 1 per chassis.	625805-B21
	4 Node 8LFF Configurations - order the following cables to connect the midplane to the drive backplane:
	HP Mini-SAS to SAS/SATA E FIO Cable Kit NOTE: Quantity 2 per chassis.	630870-B21
	HP Mini-SAS to SAS/SATA F FIO Cable Kit NOTE: Quantity 2 per chassis.	630872-B21
	4 Node 16SFF Configurations - order the following cables to connect the midplane to the drive backplane:
	HP Mini-SAS to Mini-SAS 25cm FIO Cable Kit NOTE: Quantity 1 per chassis.	612254-B21
	HP Mini-SAS to Mini-SAS 33cm FIO Cable Kit NOTE: Quantity 3 per chassis.	612255-B21
	4 Node 24 SFF Configurations - order the following cables to connect the midplane to the drive backplane:
	HP Mini-SAS to Mini-SAS 25cm FIO Cable Kit NOTE: Quantity 4 per chassis.	612254-B21
	HP Mini-SAS to Mini-SAS 33cm FIO Cable Kit NOTE: Quantity 3 per chassis.	612255-B21
	HP Mini-SAS 45cm FIO Cable Kit NOTE: Quantity 1 per chassis.	625805-B21
HP Power Supplies	NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor
	HP 1200W Common Slot Platinum Hot Plug Power Supply Kit	578322-B21
	HP 1200W Common Slot Silver Hot Plug Power Supply Kit	500172-B21
Step 1A: Choose Required Nodes (Must select either a 4-Node or 2-Node solution)
HP Nodes HP ProLiant DL170e G6 Node 1U Configure-to-order Server		609095-B21
HP ProLiant DL170e G6 Node 2U Configure-to-order Server		609096-B21

 

Step 2: Choose Required Node Options (only one of the following from each list unless otherwise noted)

HP Processors	NOTE: If 2 processors are desired, select one xxxxxx-L21 and one xxxxxx-B21
	Six-Core Processors
	HP DL170e G6 Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W) FIO Processor Kit	609132-L21

 

HP Memory Registered DIMMs (RDIMMs)

HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 500656-B21

HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit	500658-B21
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit	593339-B21
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.	604504-B21
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit	500666-B21
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit	500662-B21
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.	width="67"> 604506-B21
Unbuffered with ECC DIMMs (UDIMMs) NOTE: Maximum 12 DIMMs supported per node.
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit	500670-B21
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit	500672-B21
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator. NOTE: Kits described as LV include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient NOTE: PC3L is a low voltage memory.
NOTE: There is a maximum support limitation of 8 ranks per memory channel

(maximum of 2 quad rank DIMMs per channel)

NOTE: Memory Min and Max depends on number of processors and type of memory:

1. Processor -> R-Dimm: Min 1 // Max 8 U-Dimm: Min 1 // Max 6

2. Processors -> R-Dimm: Min 2 // Max 16 U-Dimm: Min 2 // Max 12

 

HP I/O Expansion Options Full-height (Only required if PN: 609096-B21 is selected in Step 1A above)
HP DL170h Input/Output PCIex16x4x4 FIO Riser Kit	514005-B21
HP DL170h Input/Output PCIe x8x8x8 FIO Riser Kit	503587-B21
HP DL170h Input/Output PCIe x16x8 FIO Riser Kit	512481-B21

NOTE: The 2 slot riser (P/N: 512481-B21) is the only riser option that supports the NVIDIA graphics cards.

 

Step 3: Choose Additional Factory Integratable Options (only one of the following from each list unless otherwise noted)

HP Storage Controllers NOTE: Non-Hot-Plug SATA Models: The embedded HP Smart Array B110i SATA RAID

supports RAID 0,1,10 and cold-plug capability with hot-plug form factor drives. Nonhot-plug form factor hard disk drives are not supported in the DL2000.

NOTE: Hot-Plug SATA Models: A HP Smart Array B110i SATA RAID Hot-Plug Advanced

Pack per server or virtual machine is required for hot-plug SATA using the embedded B110i SATA RAID controller.

NOTE: Supported controllers vary by configuration. See table below for supported controllers. For a complete list of HP Storage controllers, please see the Additional Options section of this QuickSpecs. Only FIO options are mentioned here.

	Configuration	Supported Controllers
	4x1U nodes with 8LFF HDD cage (2 HDDs/node max)	Embedded (SATA only) or P410 (SATA/SAS)
	4x1U nodes with 16SFF HDD cage (4 HDDs/node max)	Embedded (SATA only) or P212 or P410 (SATA/SAS)
	4x1U nodes with 24SFF HDD cage (6 HDDs/node max)	Embedded (SATA only) or P410 (SATA/SAS)
	2x2U nodes with 8LFF HDD cage (4 HDDs/node max)	Embedded (SATA only) or P212, P410 or P812 (SATA/SAS)
	2x2U nodes with 16SFF HDD cage (8 HDDs/node max)	P410 or P812 (SATA/SAS)
	2x2U nodes with 24SFF HDD cage (12 HDDs/node max)	P410 or P812 (SATA/SAS) and SAS Expander
HP Smart Array P410/ZM 2-ports Int PCIe x8 FIO SAS Controller				462860-B21
Controller Cable Kits NOTE: Required Controller Cables for the DL2000. The Controller Cables below connect to the adapter board and is based on the controller used. (If using a configurator, these cable kits will automatically be included based on controller selection.) For a complete list of HP Controller Cable Kits, please see the Additional Options section of this QuickSpecs. Only FIO options are mentioned here.
HP DL170e G6 Smart Array P410 Controller Cable Kit NOTE: Supports SAS and SATA drives when using Smart Array P410 Controller.				612206-B21
HP DL170e G6 Smart Array Controller Cable Kit NOTE: Supports SAS and SATA drives when using any Smart Array Controller other than the Smart Array P410 Controller.				612207-B21
Optional Upgrades
HP Smart Array Hot Plug Advance Pack for B110i w/1y 24x7 Supp Physical 1 Svr LTU				TC421A

 

Step 4: Choose Additional Options for Factory Integration

NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below.

NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.

HP Unique Options	HP DL170e G6 Smart Array P410 Controller Cable Kit NOTE: This cable kit is only required when upgrading with a Smart Array P410 Controller after initial purchase. NOTE: Supports SAS and SATA drives when using Smart Array P410 Controller.	612206-B21
	HP DL170e G6 Smart Array Controller Cable Kit NOTE: This cable kit is only required when upgrading with any Smart Array Controller other than the P410 after initial purchase. NOTE: Supports SAS and SATA drives when using any Smart Array Controller other than the Smart Array P410 Controller.	612207-B21
	HP DL170e G6 Graphics Processing Unit Adapter Card Kit NOTE: This kit is required when installing a NVIDIA card in the DL170e 2U server node.	612253-B21
	HP Rack Rail Shipping Bracket Kit NOTE: This kit is required after initial purchase when shipping a DL2000 in a rack with 1U or more of space above it from one location to another.	626167-B21
	HP DL2000 Server Node Servicing Blank Kit	612898-B21

 

HP Processors	Six-Core Processors
	HP DL170e G6 Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W) Processor Kit	638021-B21
	HP DL170e G6 Intel® Xeon® X5660 (2.80GHz/6-core/12MB/95W) Processor Kit	609142-B21
	HP DL170e G6 Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W) Processor Kit	609140-B21
	HP DL170e G6 Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W) Processor Kit	638019-B21
	HP DL170e G6 Intel® Xeon® E5645 (2.40GHz/6-core/12MB/80W) Processor Kit	638017-B21
	HP DL170e G6 Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W) Processor Kit	609132-B21
	Quad-Core Processors
	HP DL170e G6 Intel® Xeon® E5620 (2.40GHz/4-core/12MB/80W) Processor Kit	609136-B21
	HP DL170e G6 Intel® Xeon® L5630 (2.13GHz/4-core/12MB/40W) Processor Kit	612468-B21
	HP DL170e G6 Intel® Xeon® E5607 (2.26GHz/4-core/8MB/80W) Processor Kit	638015-B21
	HP DL170e G6 Intel® Xeon® E5603 (1.60GHz/4-core/4MB/80W) Processor Kit	638013-B21

 

HP Memory Registered DIMMs (RDIMMs)

HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 500656-B21

HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 500658-B21

HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 593339-B21

HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power 604504-B21 Memory Kit

NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.

HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit 500666-B21

HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 500662-B21

HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power 604506-B21 Memory Kit

NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.

Unbuffered with ECC DIMMs (UDIMMs)

NOTE: Maximum 12 DIMMs supported per node.

HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500670-B21

HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500672-B21 NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.

NOTE: Kits described as LV include Low Power DIMMs. For more information on ProLiant

Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient NOTE: PC3L is a low voltage memory.

NOTE: Memory DIMM blanks are required in any empty DIMM slots for proper cooling. If DIMMs are removed or the memory configuration is changed, all DIMM slots must be populated with either a blank or a DIMM.

NOTE: There is a maximum support limitation of 8 ranks per memory channel

(maximum of 2 quad rank DIMMs per channel)

NOTE: Memory Min and Max depends on number of processors and type of memory:

1. Processor -> R-Dimm: Min 1 // Max 8 U-Dimm: Min 1 // Max 6

2. Processors -> R-Dimm: Min 2 // Max 16 U-Dimm: Min 2 // Max 12

 

HP Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,

firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.

NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

NOTE: To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware version 5.0 or later is required for the following controllers:

HP Smart Array P812 Controller

To use hard drives exceeding 2.2 TB, you must create a boot volume using offline ACU version 8.75 or later. HP Smart Array controllers do not support boot volumes exceeding 2.2 TB.

Other controllers are not supported.

SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives

HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive	619291-B21
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive	581286-B21
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive	581284-B21
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive	507127-B21
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3yr Warranty Hard Drive	627117-B21
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive	512547-B21
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive	516828-B21
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive	516816-B21
HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive	516814-B21
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive	605835-B21
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive	507610-B21
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive	625031-B21
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive	507616-B21
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive	507614-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html (Worldwide)
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard Drive	625609-B21
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive	507750-B21
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive	628059-B21
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive	507632-B21
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive	454146-B21
HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive	458928-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html (Worldwide)
6G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
HP 800GB 6G SAS Mainstream Endurance SFF 2.5-in Enterprise Mainstream 3yr Warranty Solid State Drive	690823-B21
HP 400GB 6G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream 3yr Warranty Solid State Drive	690821-B21
HP 200GB 6G SAS Mainstream Endurance SFF 2.5-in Enterprise Mainstream 3yr Warranty Solid State Drive	690819-B21
6G SAS SLC Hot Plug Enterprise Performance Solid State Drives
HP 400GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid State Drive	632494-B21
HP 200GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid State Drive	632492-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional

information: http://h18000.www1.hp.com/products/quickspecs/14038_div/14038_div.html

(Worldwide)

 

HP Networking	Gigabit Ethernet adapters
	HP NC112T PCI Express Gigabit Server Adapter	503746-B21
	HP NC360T PCI-E Dual Port Gigabit Server Adapter	412648-B21
	HP NC364T PCI-E Quad Port Gigabit Server Adapter	435508-B21
	HP NC365T 4-port Ethernet Server Adapter	593722-B21
	HP NC373F PCI-E Multifunction 1000SX Gigabit Svr Adapter	394793-B21
	HP NC373T PCI-E Multifunction Gigabit Server Adapter	394791-B21
	HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter	458492-B21
	10 Gigabit Ethernet Adapters NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter. NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
	HP NC552SFP 10Gb 2-port Ethernet Server Adapter	614203-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional

information: www.hp.com/go/ProLiantNICs.

 

HP InfiniBand HP InfiniBand 4X QDR ConnectX-2 PCIe G2 Dual Port HCA 592520-B21 QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA 583211-B21 NOTE: Please see the QuickSpecs for additional information:

http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html

 

 

HP Power Supplies	NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor
	HP 1200W Common Slot Platinum Hot Plug Power Supply Kit	578322-B21
	HP 1200W Common Slot Silver Hot Plug Power Supply Kit	500172-B21
	NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.

NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.

HP Management Network HP Multinode Dedicated Management Port Option Kit 601818-B21

NOTE: Each ProLiant DL170e G6 Server comes standard with sideband support for LO100i through the shared, system NIC. Order this option (P/N 601818-B21) if a dedicated management network is desired.

HP Entry-Level Server Management	HP Lights-Out 100i (LO100i) Advanced including 1yr 24x7 Support Single Server License NOTE: For additional License Kits please see the Lights-Out 100i QuickSpecs at: www.hp.com/go/lo100.	530521-B21
HP Insight Software	HP Insight Control HP Insight Management Media Kit NOTE: HP Insight Management Media Kit contains DVDs without licenses. Contains HP Systems Insight Manager, HP Insight Control, HP Matrix Operating Environment, and Virtual Connect Enterprise Manager software. Uses an integrated installer to perform quick and accurate software installation and updates.	C6N31A
	HP Insight Control Server Deployment including 1yr 24x7 Support Electronic License	T9082AAE
	HP Insight Control Server Deployment including 1yr 24x7 Support Single Server License	452151-B21
	NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple licenses with a single activation key. NOTE: Customer will receive a license entitlement certificate. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service. NOTE: Licenses ship without media. The HP Insight Control Media Kit can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates. NOTE: For additional license options please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html HP Integrated Lights-Out (iLO) Advanced for ProLiant HP iLO Advanced including 1yr 24x7 Technical Support and Updates E-LTU	E6U59ABE
	HP iLO Advanced including 3yr 24x7 Technical Support and Updates E-LTU NOTE: For additional license options please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/14276_div/14276_div.html NOTE: For more information, visit: http://www.hp.com/go/ilo	E6U64ABE

High Performance HP Cluster Management Utility

Clusters	HP Insight Cluster Management Utility 1yr 24x7 Flexible License NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key. Each license is for one node (server). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key.	QL803B
	HP Insight Cluster Management Utility 3yr 24x7 Flexible License NOTE: These part numbers can be used to purchase one certificate for multiple licenses and support with a single activation key. Each license is for one node (server). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key. Customer also will receive a support agreement.	BD476A
	HP Insight Cluster Management Utility Media	BD477A
	NOTE: For additional license kits please see the QuickSpecs at:

http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html

 

HP Security HP Trusted Platform Module Option 488069-B21

NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely

store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server running Windows Server 2008 has not been tampered with while the system was offline. For more information about TPM, including a white paper, go to: www.hp.com/go/TPM.

NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.

NOTE: The TPM key is unique to every TPM deployed server and must be retained.

Misplacing or losing the key could result in data loss.

 

HP Storage Controllers	HP Smart Array P212 Controller
	HP Smart Array P212/256 1-ports Int/1-ports Ext PCIe x8 SAS Controller	462834-B21
	HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS Controller	462828-B21
	HP Smart Array P410 Controller
	HP Smart Array P410/256 2-ports Int PCIe x8 SAS Controller	462862-B21
	HP Smart Array P410/512 FBWC 2-ports Int PCIe x8 SAS Controller	578230-B21
	HP Smart Array P410/1G FBWC 2-ports Int PCIe x8 SAS Controller	572532-B21
	HP Smart Array P411 Controller
	HP Smart Array P411/256 2-ports Ext PCIe x8 SAS Controller	462830-B21
	HP Smart Array P411/512 FBWC 2-ports Ext PCIe x8 SAS Controller	578229-B21
	HP Smart Array P411/1G FBWC 2-ports Ext PCIe x8 SAS Controller	572531-B21
	Smart Array P812 Controller
	HP Smart Array P812/1G FBWC 2-ports Int/4-ports Ext PCIe x8 SAS Controller	487204-B21
	Optional Upgrades
	HP DL170e G6 Smart Array P410 Controller Cable Kit NOTE: This cable kit is only required when upgrading with a Smart Array P410 Controller after initial purchase. NOTE: Supports SAS and SATA drives when using Smart Array P410 Controller.	612206-B21
	HP DL170e G6 Smart Array Controller Cable Kit NOTE: This cable kit is only required when upgrading with any Smart Array Controller other than the P410 after initial purchase. NOTE: Supports SAS and SATA drives when using any Smart Array Controller other than the Smart Array P410 Controller.	612207-B21
	HP 256MB P-series Cache Upgrade NOTE: Supported on HP Smart Array P212 Controller only.	462968-B21
	HP 512MB Flash Backed Write Cache	534916-B21
	HP 1GB Flash Backed Cache NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13203_div/13203_div.html (Smart Array P212 Controller) http://h18000.www1.hp.com/products/quickspecs/13201_div/13201_div.html (Smart Array P410 Controller) http://h18000.www1.hp.com/products/quickspecs/13202_div/13202_div.html (Smart Array P411 Controller) http://h18000.www1.hp.com/products/quickspecs/13558_div/13558_div.html (Smart Array P812 Controller)	534562-B21
	SAS Controller Options
	HP 24 Bay SAS Expander Card	468406-B21
	HP Mini SAS to Mini SAS 8in Cable Assembly	496012-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18004.www1.hp.com/products/quickspecs/13232_div/13232_div.html (SAS Expander Card)
	SCSI HBA
	HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter	412911-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information:

http://h18000.www1.hp.com/products/quickspecs/12566_div/12566_div.html (SCSI HBA)

 

HP Tape Backup NOTE: For the complete range of tape drives, autoloaders, libraries and media see:

http://www.hp.com/go/tape. For hardware and software compatibility of HP tape backup products see: http://www.hp.com/storage/SPOCK

	HP StoreEver LTO-6 Ultrium 6250 Tape Drive in 1U Rack-mount Kit		C0L99A
	HP StoreEver 1/8 G2 LTO-6 Ultrium 6250 FC Tape Autoloader		C0H19A
HP Tape Storage Systems		HP StoreEver MSL6480 HP StoreEver MSL6480 Scalable Base Module NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/14604_div/14604_div.html (Worldwide)		QU625A
HP Disk Storage Systems		Disk Enclosures HP D2600 w/12 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 48TB Bundle NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13404_div/13404_div.html (Worldwide)		E7W32A
HP Storage Options		Storage Fibre Channel HBA NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html Brocade Fibre Channel HBAs HP 81B 8Gb 1-port PCIe Fibre Channel Host Bus Adapter		AP769B
		HP 82B 8Gb 2-port PCIe Fibre Channel Host Bus Adapter		AP770B
		Emulex Fibre Channel HBAs HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter		AJ762B
		HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter		AJ763B
		QLogic Fibre Channel HBAs HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter		AK344A
		HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter		AJ764A
		Converged Network Adapter HP CN1100E Dual Port Converged Network Adapter		BK835A

HP Uninterruptible Power HP Rack-mountable UPS

Systems	HP R1500 G3 Uninterruptible Power Supply (UPS)
	HP R1.5kVA G3 1U NA Uninterruptible Power System	AF469A
	HP R1.5kVA G3 1U JP/TW Uninterruptible Power System	AF470A
	HP R1.5kVA G3 1U INTL Uninterruptible Power System	AF471A
	NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/14059_div/14059_div.html (Worldwide)
	HP R/T3000 G2 Uninterruptible Power System (UPS)
	HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System	AF466A
	HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System	AF467A
	HP R/T3000 G2 2U Detachable Cord High Voltage INTL Uninterruptible Power System	AF468A
	NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/14058_div/14058_div.html (Worldwide)
	R5000 Uninterruptible Power System (UPS)
	HP R5KVA 3U IEC309-32A High Voltage INTL Uninterruptible Power System	AF461A
	HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System	AF460A
	NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/14109_div/14109_div.html (Worldwide)
	R7000 Uninterruptible Power System (UPS)
	HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System	AF462A
	HP R7KVA 4U IEC-32A High Voltage INTL Uninterruptible Power System	AF463A
	NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/14110_div/14110_div.html (Worldwide)
	NOTE: For additional information on HP Uninterruptible Power Systems please go to:

www.hp.com/servers/rackups.

NOTE: For additional information on sizing your server, please reference: http://www.upssizer.com.

NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units.

Please see the following link: www.hp.com/products/powercords.

 

HP Basic Power HP Basic Power Distribution Unit: 1U/0U Version

Distribution Units (bPDU)	HP 1.9kVA 120 Volt L5-20 Input (12xNEMA 5-20R) NA/JP Basic PDU	H5M54A
	HP 3.6kVA 200-240 Volt Detachable C20 Input ( 12xC13) WW Basic PDU	H5M56A
	HP Basic Power Distribution Unit: Half Height Version
	HP 2.8kVA 120 Volt L5-30 Input (18xNEMA 5-20R) NA/JP Basic PDU	H5M55A
	HP 3.6kVA 200-240 Volt Detachable C20 Input (18xC13) WW Basic PDU	H5M57A
	HP 4.9kVA 208 Volt L6-30 Input (20xC13) NA/JP Basic PDU	H5M58A
	HP 7.3kVA 230 Volt IEC309 32A Input (20xC13) INTL Basic PDU	H5M68A
	HP 8.6kVA 208 Volt L15-30 3-Phase Input (18xC13) NA/JP Basic PDU	H5M61A
	HP Basic Power Distribution Unit: Mid Height Version
	HP 4.9kVA 208 Volt L6-30 Input (24xC13/6xC19) NA/JP Basic PDU	H5M59A
	HP 7.3kVA 230 Volt IEC309 32A Input (24xC13/6xC19) INTL Basic PDU	H5M70A
	HP 8.3kVA 208 Volt CS8265C Input (30xC13/6xC19) NA/JP Basic PDU	H5M60A
	HP 11kVA 230 Volt IEC309 63A Input (30xC13/6xC19) INTL Basic PDU	H5M71A
	HP Hardwired 200-240 Volt Input (30xC13/6xC19) WW Basic PDU	H5M75A
	HP 5.7kVA 208 Volt L21-20 3-Phase Input (24xC13/3xNEMA 5-20R) NA/JP Basic PDU	H5M63A
	HP 8.6kVA 208 Volt L21-30 3-Phase Input (24xC13/3xC19/3xNEMA 5-20R) NA/JP Basic PDU	H5M64A
	HP 8.6kVA 208 Volt L15-30 3-Phase Input (24xC13/6xC19) NA/JP Basic PDU	H5M62A
	HP 11kVA 400 Volt IEC309 16A 3-Phase Input (30xC13/6xC19) INTL Basic PDU	H5M72A
	HP Basic Power Distribution Unit: Full Height Version
	HP 11kVA 400 Volt IEC309 16A 3-Phase Input (36xC13/6xC19) INTL Basic PDU	H5M73A
	HP 11kVA 400 Volt IEC309 30A 3-Phase Input (36xC13/6xC19) NA Basic PDU	H5M67A
	HP Basic Power Distribution Unit: 480/277 Volt Version
	HP 13.2kVA 480 Volt IEC309 30A 3-Phase Input (15 Outlet) NA Basic PDU	H3X07A
	HP 19.9kVA 480 Volt IEC309 30A 3-Phase Input (30 Outlet) NA Basic PDU	H3X08A
	HP 800VA - 277V Input / 230V Output NA Rack Mount Transformer	H3X09A
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/14557_div/14557_div.html (Worldwide)
	NOTE: Additional HP Power Distribution Units are available. For a complete list of all HP

PDUs and additional information please visit: www.hp.com/go/rackandpower.

 

 

HP Remote Monitoring Power Distribution Units (mPDU)	HP Remote Monitored Power Distribution Unit: 1U Version HP 2.8kVA 120 Volt L5-30 Input (12xNEMA 5-20R)NA/JP Monitored PDU HP 3.6kVA 200-240 Volt Detachable C20 Input (12xC13) WW Monitored PDU	D9N43A D9N46A
	HP 4.9kVA 208 Volt L6-30 Input (12xC13) NA/JP Monitored PDU	D9N44A
	HP Remote Monitored Power Distribution Unit: Half Height Version
	HP 3.6kVA 200-240 Volt Detachable C20 Input (16xC13) WW Monitored PDU	D9N45A
	HP Remote Monitored Power Distribution Unit: Mid Height Version
	HP 4.9kVA 208 Volt L6-30 Input (20xC13/4xC19) NA/JP Monitored PDU	D9N47A
	HP 7.3kVA 230 Volt IEC309 32A Input (20xC13/4xC19) INTL Monitored PDU	D9N48A
	HP 8.6kVA 208 Volt L15-30 3-Phase Input (18xC13/3xC19) NA/JP Monitored PDU	D9N51A
	HP 5.7kVA 208 Volt L21-20 3-Phase Input (18xC13/3xNEMA 5-20R) NA/JP Monitored PDU	D9N52A
	HP 8.6kVA 208 Volt L21-30 3-Phase Input (20xC13/3xC19/3xNEMA 5-20R) NA/JP Monitored PDU	D9N53A
	HP 11kVA 400 Volt IEC309 16A 3-Phase Input (18xC13/3xC19) INTL Monitored PDU	D9N55A
	HP Remote Monitored Power Distribution Unit: Full Height Version
	HP 8.3kVA 208 Volt CS8265C Input (30xC13/3xC19) NA Monitored PDU	D9N49A
	HP 7.3kVA 230 Volt IEC309 32A Input (32xC13/4xC19) INTL Monitored PDU	D9N50A
	HP 11kVA 400 Volt IEC309 16A 3-Phase Input (30xC13/3xC19) INTL Monitored PDU	D9N57A
	HP 14.4kVA 208 Volt CS8365C 3-Phase Input (12xC13/12xC19)NA Monitored PDU	D9N58A
	HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (30xC13/3xC19) NA Monitored PDU	D9N61A
	HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (24xC13/3xC19) NA/JP Monitored PDU	D9N54A
	HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (12xC13/12xC19) NA/JP Monitored PDU	D9N59A
	HP 22kVA 400 Volt IEC309 32A 3-Phase Input (12xC13/12xC19) INTL Monitored PDU	D9N60A
	HP 22kVA 400 Volt IEC309 32A 3-Phase Input (30xC13/3xC19) INTL Monitored PDU	D9N56A
	HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (12xC13/12xC19) NA Monitored PDU	D9N62A
	HP 19.9kVA 480 Volt 3-Phase (30 Outlet) NA Monitored PDU	D9N63A
	HP Environmental Sensor for Remote Monitored PDUs
	HP Environmental Sensor for Remote Monitored PDUs	E2D53A
	NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/14669_div/14669_div.html (Worldwide)

 

HP Intelligent Power Distribution Units (iPDU)	iPDU Core Units HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit	AF520A
	HP 8.3kVA 40A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit	AF521A
	HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit	AF522A
	HP 14.4kVA 40A Three Phase NA/JP Intelligent Modular Power Distribution Unit	AF533A
	HP 17.3kVA 48A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit	AF523A
	HP 17.3kVA 24A 415V Three Phase L22-30 NA Core Intelligent Power Distribution Unit	AF902A
	HP 7.3kVA 32A Single Phase INTL Core Intelligent Modular Power Distribution Unit	AF525A
	HP 11kVA 16A Three Phase INTL Core Intelligent Modular Power Distribution Unit	AF526A
	HP 22kVA 32A Three Phase INTL Core Intelligent Modular Power Distribution Unit	AF527A
	HP 17.3kVA 48A 208V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution Unit	AF535A
	HP 17.3kVA 24A 415V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution Unit	AF537A
	HP 22kVA 32A 400V Three Phase 12 Outlet Core INTL Intelligent Power Distribution Unit	AF538A
	iPDU Kits with Standard Extension Bars
	HP 4.9kVA 24A Single Phase NA/JP Intelligent Modular Power Distribution Kit	AF531A
	HP 8.6kVA 24A Three Phase NA/JP Intelligent Modular Power Distribution Kit	AF532A
	HP 7.3kVA 32A Single Phase INTL Intelligent Modular Power Distribution Kit	AF534A
	iPDU Extension Bars
	HP 5xC13 Intelligent PDU Extension Bar G2 Kit	AF547A
	HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar	AF528A
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13650_div/13650_div.html (Worldwide) NOTE: Additional HP Power Distribution Units are available. For a complete list of all HP PDUs and additional information please visit: www.hp.com/go/rackandpower.

 

HP Rack Series	HP Intelligent Series Rack
	HP 642 1075mm Pallet Intelligent Series Rack	BW903A
	HP 642 1075mm Shock Intelligent Series Rack	BW904A
	NOTE: Please see the QuickSpecs for Technical Specifications such as height, width,

depth, weight, and color:

HP Rack Options	HP TFT7600 G2 KVM Console and Monitor (TFT7600 G2)
	HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor	AZ870A
	HP TFT7600 G2 KVM Console Rackmount Keyboard UK Monitor	AZ871A

http://h18000.www1.hp.com/products/quickspecs/14223_div/14223_div.html (Worldwide)

NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower.

 

HP TFT7600 G2 KVM Console Rackmount Keyboard DE Monitor	AZ872A
HP TFT7600 G2 KVM Console Rackmount Keyboard FR Monitor	AZ873A
HP TFT7600 G2 KVM Console Rackmount Keyboard IT Monitor	AZ874A
HP TFT7600 G2 KVM Console Rackmount Keyboard ES Monitor	AZ875A
HP TFT7600 G2 KVM Console Rackmount Keyboard DK Monitor	AZ876A
HP TFT7600 G2 KVM Console Rackmount Keyboard NO Monitor	AZ877A
HP TFT7600 G2 KVM Console Rackmount Keyboard SE/FI Monitor	AZ878A
HP TFT7600 G2 KVM Console Rackmount Keyboard CH Monitor	AZ879A
HP TFT7600 G2 KVM Console Rackmount Keyboard PT Monitor	AZ880A
HP TFT7600 G2 KVM Console Rackmount Keyboard BE Monitor	AZ881A
HP TFT7600 G2 KVM Console Rackmount Keyboard JP Monitor	AZ882A
HP TFT7600 G2 KVM Console Rackmount Keyboard RU Monitor	AZ883A
HP TFT7600 G2 KVM Console Rackmount Keyboard Intl Monitor	AZ884A
HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor	AZ885A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13731_div/13731_div.html (Worldwide)
HP USB Keyboard and Mouse
HP USB BFR with PVC Free US Keyboard/Mouse Kit	631341-B21
HP USB BFR with PVC Free UK Keyboard/Mouse Kit	631344-B21
HP USB BFR with PVC Free FR Keyboard/Mouse Kit	631346-B21
HP USB BFR with PVC Free ES Keyboard/Mouse Kit	631348-B21
HP USB BFR with PVC Free DE Keyboard/Mouse Kit	631358-B21
HP USB BFR with PVC Free JP Keyboard/Mouse Kit	631360-B21
HP USB BFR with PVC Free IT Keyboard/Mouse Kit	631362-B21
HP USB BFR with PVC Free CN Keyboard/Mouse Kit	631364-B21
HP USB BFR with PVC Free AE Keyboard/Mouse Kit	638212-B21
HP USB BFR with PVC Free RU Keyboard/Mouse Kit	638214-B21
HP USB BFR with PVC Free AP-Intl Keyboard/Mouse Kit	672097-373
HP USB BFR with PVC Free Intl Keyboard/Mouse Kit	672097-B33
HP USB BFR with PVC Free PT Keyboard/Mouse Kit	672097-133
HP USB BFR with PVC Free TR Keyboard/Mouse Kit	672097-143
HP USB BFR with PVC Free CZ Keyboard/Mouse Kit	672097-223
HP USB BFR with PVC Free FI Keyboard/Mouse Kit	672097-353
HP USB BFR with PVC Free SE Keyboard/Mouse Kit	672097-103
HP USB BFR with PVC Free CH Keyboard/Mouse Kit	672097-113
HP USB BFR with PVC Free KR Keyboard/Mouse Kit	672097-KD3
HP USB BFR with PVC Free IN Keyboard/Mouse Kit	672097-D63
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13972_div/13972_div.html (Worldwide)
HP Server Console Switches
HP Server Console 0x2x8 Port Analog Switch	AF616A
HP Server Console 0x2x16 Port Analog Switch	AF617A
HP TAA 0x2x16xKVM Server Console G2 Switch	AF626A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11834_div/11834_div.html (Worldwide)
HP Server Console Switch G2 with Virtual Media & CAC
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software	AF618A
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software	AF619A
HP KVM CAT5 1-pack USB Interface Adapter	336047-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13475_div/13475_div.html (Worldwide)
HP IP Console Switch G2 with Virtual Media & CAC
HP 1x4 USB/PS2 KVM Console Switch	AF611A
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software	AF620A
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software	AF621A
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software	AF622A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13474_div/13474_div.html (Worldwide)
Rail Kits
HP Rack Rail Shipping Bracket Kit	626167-B21

NOTE: This kit is required after initial purchase when shipping a DL2000 in a rack with 1U or more of space above it from one location to another.

 

Memory

HP ProLiant DL170e G6 Server

NOTE: Memory configurations show Maximum Memory population.

Maximum Memory

Up to 192GB, using PC3-8500R DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated at 2 DIMMs per Channel in 12 slots

Up to 48GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1333MHz when fully populated at 2 DIMMs per

Channel in 12 slots

NOTE: RDIMMs and UDIMMs cannot be in the same system so the maximum RDIMM memory configuration can only be achieved with BTO models by replacing all of the UDIMMs.

NOTE: Chart does not represent all possible memory configurations. DDR3 memory population guidelines

For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator

Some DIMM installation guidelines are summarized below:

Memory DIMM blanks are required in any empty DIMM slots for proper cooling. If DIMMs are removed or the memory configuration is changed, all DIMM slots must be populated with either a blank or a DIMM.

For servers with sixteen (16) memory slots

There are three (3) channels per processor; six (6) channels per server

There are two (3) DIMM slots for two memory channels and one (2) DIMM slots for one memory channel; sixteen (16) total slots

Memory channel 1 consists of the two (2) DIMM slots that are closest to the processor

Memory channels 2 and 3 consist of the six (6) DIMM slots that are furthest from the processor

DIMM slots that are white should be populated first

Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)

Do not install DIMMs if the corresponding processor is not installed

If only one processor is installed in a 2CPU system, only half of the DIMM slots are available

To maximize performance, balance the total memory capacity between all installed processors

It is not required, but it is recommended to load the channels similarly if possible

You can only have up to eight (8) ranks installed per channel

You can only install two quad-rank DIMMs per channel

You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty

Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.

For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically

For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots will be 1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system

If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of supporting 1.5V operations.

 

Memory

DIMM Type ->			Registered DIMMs (RDIMMs)						Unbuffered with ECC DIMMs (UDIMMs)
DIMM Rank ->	Single Rank (1R)		Dual Rank (2R)				Quad Rank (4R)		Single Rank (1R)	Dual Rank (2R)
DIMM Capacity ->	4GB	2GB	4GB	8GB	8GB	16GB	4GB	16GB	1GB	2GB	4GB
DIMM Native Speed (MHz) ->	1333	1333	1333	1066	1333	1333	1066	1066	1333	1333	1333
Voltage	LV/Std	Std	Std	Std	LV/Std	LV/Std	Std	Std	Std	Std	LV/Std
SLOTS THAT CAN BE POPULATED
16 slot servers	16	16	16	16	16	16	12	12	12	12	12
MAXIMUM MEMORY CAPACITY (GB)
16 slot servers	64	32	64	128	128	256	48	192	12	24	48
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel	1333	1333	1333	1066	1333	1333	1066	1066	1333	1333	1333
2 DIMMs Per Channel	1333*	1333*	1333*	1066	1333*	1066/ 1333**	800	800	1066	1066	1333*
3 DIMMs Per Channel (on 2 channels)	800	800	800	800	800	800***	N/A	N/A	N/A	N/A	N/A

*supported with ROM update via ROM Based Setup Utility (RBSU)

** 2DPC: LV runs at 1066, Std voltage runs at 1333

***3DPC: LV/Std voltage runs at 800 NOTES:

PC3-10600 DIMMs have a maximum speed of 1333MHz. PC3-8500 DIMMs have a maximum speed of 1066MHz

Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities

If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slower DIMM is on the other processor

If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be 1066MHz If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels, the maximum speed will be 1066MHz

If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz

Maximum memory speed will also depend on the processor installed

References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.

 

DIMM slot and configuration diagrams Basic memory slot & population diagram

Population order; start with "A" first, "B" second, "C" third, etc. DIMM 8 is DIMM furthest away from the CPU and DIMM 1 is DIMM closest to CPU.

 

RDIMM maximum configuration (2 CPUs)

192GB, consisting of sixteen (16) 16GB quad rank PC3-8500 RDIMMs

	C	PU1	C	PU2
	slot #	population order	slot #	population order
Chnl 1	1	A; 16GB DIMM	1	A; 16GB DIMM	Chnl 1
	2	D; 16GB DIMM	2	D; 16GB DIMM
	3	G; empty	3	G; empty
Chnl 2	4	B; 16GB DIMM	4	B; 16GB DIMM	Chnl 2
	5	E; 16GB DIMM	5	E; 16GB DIMM
	6	H; empty	6	H; empty
Chnl 3	7	C; 16GB DIMM	7	C; 16GB DIMM	Chnl 3
	8	F; 16GB DIMM	8	F; 16GB DIMM

 

UDIMM maximum configuration (2 CPUs)

48GB, consisting of twelve (12) 2GB dual-rank PC3-10600 UDIMMs

	CPU1		C	PU2
	slot #	population order	slot #	population order
Chnl 1	1	A; 4GB DIMM	1	A; 4GB DIMM	Chnl 1
	2	D; 4GB DIMM	2	D; 4GB DIMM
	3	G; empty	3	G; empty
Chnl 2	4	B; 4GB DIMM	4	B; 4GB DIMM	Chnl 2
	5	E; 4GB DIMM	5	E; 4GB DIMM
	6	H; empty	6	H; empty
Chnl 3	7	C; 4GB DIMM	7	C; 4GB DIMM	Chnl 3
	8	F; 4GB DIMM	8	F; 4GB DIMM

Memory

 

NOTE: Capacity references are rounded to the common Gigabyte values.

1GB = 1024MB

2GB = 2048MB

4GB = 4096MB

8GB = 8192MB

HP Memory	Registered DIMMs (RDIMMs)
	HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit	500656-B21
	HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit	500658-B21
	HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit	593339-B21
	HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.	604504-B21
	HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit	500666-B21
	HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit	500662-B21
	HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.	604506-B21
	Unbuffered with ECC DIMMs (UDIMMs) NOTE: Maximum 12 DIMMs supported per node.
	HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit	500670-B21
	HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit	500672-B21
	NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory

configuration rules and guidelines, please use the Online DDR3 Memory Configuration

Memory

Tool: www.hp.com/go/ddr3memory-configurator.

NOTE: Kits described as LV include Low Power DIMMs. For more information on ProLiant

Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient NOTE: PC3L is a low voltage memory.

NOTE: There is a maximum support limitation of 8 ranks per memory channel

(maximum of 2 quad rank DIMMs per channel)

NOTE: Memory Min and Max depends on number of processors and type of memory:

1. Processor -> R-Dimm: Min 1 // Max 8 U-Dimm: Min 1 // Max 6

2. Processors -> R-Dimm: Min 2 // Max 16 U-Dimm: Min 2 // Max 12

 

1-8 Eight 3.5" Hot-plug SAS/SATA hard drive bays (two node configuration)

1-8 Eight 3.5" Hot-plug SAS/SATA hard drive bays (four node configuration)

1-24 Twenty-four 2.5" Hot-plug SAS/SATA hard drive bays

1-16 Sixteen 2.5" Hot-plug SAS/SATA hard drive bays

 

Drive Support

 

Removable Media
	Quantity Supported	Position Supported	Controller
DVD-ROM	Up to 2 per node	External	USB
DVD/CD RW	Up to 2 per node	External	USB

Hard Drives

NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.

NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. NOTE: To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware version 5.0 or later is required for the following controllers:

HP Smart Array P212 Controller

HP Smart Array P410 Controller

HP Smart Array P411 Controller

HP Smart Array P812 Controller

To use hard drives exceeding 2.2 TB, you must create a boot volume using offline ACU version 8.75 or later. HP Smart Array controllers do not support boot volumes exceeding 2.2 TB. Other controllers are not supported.

SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives

	Quantity Supported		Position Supported		Controller
900GB 6G SAS 10K 600GB 6G SAS 10K 450GB 6G SAS 10K 300GB 6G SAS 10K 300GB 6G SAS 15K 146GB 6G SAS 15K	24		1-24		HP Smart Array P212/Zero Memory Controller HP Smart Array P212/256 MB Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BBWC Controller
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives Quantity Position Supported Supported						Controller
600GB 6G SAS 15K 450GB 6G SAS 15K 300GB 6G SAS 15K		Up to 8		1-8		HP Smart Array P212/Zero Memory Controller HP Smart Array P212/256 MB Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BBWC Controller
SAS Hot Plug SFF (2.5-inch) Mi		dline (MDL) Drives Quantity Supported		Position Supported		Controller
1TB 6G SAS 7.2K 500GB 6G SAS 7.2K		Up to 24		1-24		HP Smart Array P212/Zero Memory Controller HP Smart Array P212/256 MB Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BBWC Controller

SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives Quantity Position Supported Supported Controller

Power Specifications

HP 1200W Common Slot Platinum Hot Plug Power Supply Kit
Part Number	578322-B21
Input Voltage Range ( V rms )	100 to 240
Frequency Range (Nominal) ( Hz )	50/60
Nominal Input Voltage ( Vrms )	100	120	200	208	220	230	240
Maximum Rated Output Wattage Rating	800	900	1200	1200	1200	1200	1200
Nominal Input Current ( A rms )	9.3	8.6	6.7	6.5	6.1	5.8	5.6
Maximum Rated Input Wattage Rating ( Watts )	889	989	1290	1290	1290	1290	1290
Maximum Rated VA ( Volt-Amp )	927	1031	1345	1345	1345	1345	1345
Efficiency ( % )	90	91	93	93	93	93	93
Power Factor				0.97
Leakage Current ( mA )	0.42	0.50	0.83	0.87	0.92	0.96	1.00
Maximum Inrush Current ( A peak )				30
Maximum Inrush Current duration ( mS )				10
Maximum British Thermal Unit Rating ( BTU-Hr )	3033	3375	4403	4403	4403	4403	4403

 

HP 1200W Common Slot Silver Hot Plug Power Supply Kit
Part Number	500172-B21
Input Voltage Range ( V rms )	100 to 240
Frequency Range (Nominal) ( Hz )	50/60
Nominal Input Voltage ( Vrms )	100	120	200	208	220	230	240
Maximum Rated Output Wattage Rating	800	900	1200	1200	1200	1200	1200
Nominal Input Current ( A rms )	9.7	9.0	7.0	6.8	6.4	6.1	5.9
Maximum Rated Input Wattage Rating ( Watts )	930	1034	1348	1348	1348	1348	1348
Maximum Rated VA ( Volt-Amp )	970	1079	1406	1406	1406	1406	1406
Efficiency ( % )	86	87	89	89	89	89	89
Power Factor				0.97
Leakage Current ( mA )	0.42	0.50	0.83	0.87	0.92	0.96	1.00
Maximum Inrush Current ( A peak )				30
Maximum Inrush Current duration ( mS )				20
Maximum British Thermal Unit Rating ( BTU-Hr )	3174	3530	4600	4600	4600	4600	4600

To review typical system power ratings use the Active Answers HP Power Advisor which is available via the online tool located at URL:

www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor

System Specifications

Power
ProLiant DL170e G6 Fully Configured	115V/60Hz	220V/50Hz
Fully Loaded System Input Wattage (W)	651	638
Fully Loaded System Input Current (A rms)	5.7	3.0
Fully Loaded System Thermal (BTU- Hr)	2218	2174
Fully Loaded System VA (Volt-Amp)	657	657
System Leakage with all power supplies loaded (mA)	1.58	3.03
System Inrush Current with all power supplies loaded (A)	19	37
Power cord requirements	Nema 5-15P to IEC320-C13	IEC320-C13 to IEC320-C14
NOTE: Power shown is for a fully configured system consisting of (2) CPUs, (16) DIMMs, (2) HDDs, and (1) PCI card per node.
Power Cord		AF556A

 

Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard

NOTE: ProLiant DL servers are primarily connected to PDU's in data center racks so they ship standard with only a PDU power cord (416151-B21).

NOTE: Japan BTO and CTO configurations get the 6' 4165151-291 power cord in addition. China BTO and CTO configurations get the 6' 416151-AA1 power cord in addition.

NOTE: If customers require a local power cord, they can check the power cord matrix for the appropriate cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.

System Unit Dimensions (H x W x D) 3.44 x 17.64 x 28.91 in (8.74 x 44.81 x 73.43 cm)

(with bezel)

Weight Maximum 77.00 lb (34.93 kg)

(approximate) (all hard drives, power

supplies, and processors

installed)

Minimum 49.00 lb (22.22 kg)

(one hard drive, power supply, and processor

installed)

Input Requirements Rated Line Voltage 90 to 140 VAC

(per power supply) 180 to 264 VAC

Rated Input Current 7.31A at 115VAC

3.6A at 230VAC

Rated Input Frequency 47 to 63 Hz

Rated Input Power 855W (at 100 VAC),

840.72W (at 200 VAC)

Power Specifications NOTE: To review typical system power ratings use the HP Power Advisor

which is available online located at url: www.hp.com/go/proliant-energyefficient or www.hp.com/go/hppoweradvisor Power Supply Output Rated Steady-State Power 653.10W (at 100 VAC),

(per power supply) 653.08W (at 200 VAC)

System Inlet Operating 50° to 95° F (10° to 35° C) at sea level with an

Temperature altitude derating of 1.8°F per every 1000 ft (1.0°C

per every 304.8 m) above sea level to a maximum of 10,000 ft (3048 m), no direct sustained sunlight. Maximum rate of change is 18°F/hr (10°C/hr). The upper limit may be limited by the type and number of options installed.

System performance may be reduced if operating with a fan fault or above 86°F (30°C).

Non-operating 40° to 140° F (-40° to 60° C)

Maximum rate of change is 36°F/hr (20°C/hr).

Relative Humidity Operating 10% to 85% relative humidity (Rh), 82.4°F (28°C)

(non-condensing) maximum wet bulb temperature, non-

condensing.

Non-operating 10% to 95% relative humidity (Rh), 101.7°F (38.7°C) maximum wet bulb temperature, noncondensing.

Altitude Operating 10,000 ft (3048 m). This value may be limited by

the type and number of options installed. Maximum allowable altitude change rate is 1500 ft/min (457 m/min).

Non-operating 30,000 ft (9144 m). Maximum allowable altitude change rate is 1500 ft/min (457 m/min).

Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared

average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). The listed sound levels apply to minimally populated shipping configurations. Additional options may result in increased sound levels.

	Node type	1U	2U
	Idle
	LWAd	6.4 B	6.5 B
	LpAm	47 dBA	48 dBA
	Operating
	LWAd	6.4 B	6.5 B
	LpAm	47 dBA	48 dBA
Emissions Classification (EMC)	FCC Rating Normative Standards	Class A
		CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;

ICES-003; CNS13438; GB9254; K22;K24; EN

61000-3-2; EN 61000-3-3; EN 60950-1; IEC

60950-1

NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

 

Simultaneous drive transfer channels	4 channels
Transfer rate synchronous (maximum theoretical)	1.5 Gb/s
Data transfer method	Intel® ICH10R
Drive support	Serial ATA
Data transfer modes	Legacy Mode Combined Mode
Protocol	Serial ATA
Feature	NCQ (Native Command Queuing); AHCI (Advanced Host Controller Interface)
RAID levels supported	0, 1, 10
RAID Features	Supports multiple logical volumes Setup through ROM based Array Configuration Utility Installation scripting support NOTE: Hot-Plug functions require the purchase of the HP Smart Array Hot Plug Advance Pack for B110i.
RAID OS Support	Microsoft Windows Server 2003 x32 and x64 Editions Microsoft Windows Server 2008 x32 and x64 Editions. Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 5 (x86) Red Hat Enterprise Linux 5 (AMD64/EM64T) SUSE Linux Enterprise Server 10 (x86)

HP Smart Array B110i

SATA RAID Controller SUSE Linux Enterprise Server 10 (AMD64/EM64T)

SUSE Linux Enterprise Server 11 (x86)

SUSE Linux Enterprise Server 11 (AMD64/EM64T)

Embedded NC362i PCIe Gigabit Server Adapter	Network Interface	Integrated 10/100/1000BASE-T Transceiver Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver.
	Data Transfer Method	Compliant to x4 PCIe Specification
	Controller	Intel® 82576
	Network Transfer Rate	10Base-T (Half-Duplex)	10 Mb/s
		10Base-T (Full-Duplex)	20 Mb/s
		100Base-TX (Half-Duplex)	100 Mb/s
		100Base-TX (Full-Duplex)	200 Mb/s
		1000Base-TX (Half and Full-Duplex)	2000Mb/s
	Connector	RJ-45 connector
	Cable Support	Performs all the physical layer functions for 10BASE-T, 100BASE-T, and 1000BASE-T Ethemet on standard Category 5 UTP
Environment-friendly Products and Approach	End-of-life Management and Recycling	Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.

© Copyright 2014 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.