1.

Four (4) LFF or Eight (8) SAS/SATA HDD cage

2.

Four (4) USB 3.0 connectors

3.

Media Drive Blank

4.

9.5mm Slim SATA DVD-ROM or DVD RW Optical Drive

5.

Power On/Standby button and system power LED button

6.

NIC status LED

7.

Health LED

8.

UID (unit identification) button/LED

Model

CPU frequency

Cores

L3 Cache

Power

DDR4 Hz

G4560

3.5 GHz

2

3MB

54W

2400

G4600

3.6 GHz

2

3MB

51W

2400

i3-7100

3.9 GHz

2

3MB

51W

2400

i3-7300

4.0 GHz

2

3MB

51W

2400

E3-1220v6

3.0 GHz

4

8MB

72W

2400

E3-1230v6

3.5 GHz

4

8MB

72W

2400

E3-1240v6

3.7 GHz

4

8MB

72W

2400

E3-1270v6

3.8 GHz

4

8MB

72W

2400

E3-1280v6

3.9 GHz

4

8MB

72W

2400

Cache Memory

One of the following depending on model

8MB (1 x 8MB) Level 3 cache

NOTE: For Quad-core Intel Xeon® processors.

3MB (1 x 3MB) Level 3 cache

NOTE: For Dual-core Intel Pentium® Core^TM i3 processors.

Chipset

Intel® C236 Chipset

NOTE: For more information regarding Intel® chipsets, please see the following

URL: http://www.intel.com/products/server/chipsets/

On System

Management

Chipset

HPE iLO (Firmware HPE iLO4 2.0 or later) 4GB NAND

NOTE: 1GB USB user space configurable via UEFI and accessible via iLO. Read and learn more in the HPE iLO QuickSpecs.

One of the following DDR4 Unbuffered (UDIMM) ^{depending on} DIMM Slots Available 4 model

Maximum Capacity 64GB

4 DIMMs (2 Channels/ 2 DIMMs per channel)

(4 x 16GB UDIMM @2400MHz)

Storage Controller One of the following depending on model

Base Models HPE Dynamic Smart Array B140i Controller

NOTE: B140i can't mix with any standup internal controller. Performance Models HPE Dynamic Smart Array B140i Controller NOTE: B140i can't mix with any standup internal controller.

Internal Storage

Devices

One of the following depending on model

Optical Drives

Hard Drives

Hard Drive Bays

Optional SATA 9.5mm DVD-ROM Optical Drive

Optional SATA 9.5mm DVD RW Optical Drive

None ship standard

4 LFF drive bays (non-hot-plug and hot-plug)

8 SFF hot-plug drive bays

NOTE: HPE ProLiant ML30 Series servers offer both SFF and LFF versions in CTO. NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard drive blanks, they can order more using either P/N 666987-B21: HPE SFF HDD Blank Kit or P/N 666986-B21: HPE LFF HDD Blank Kit.

Maximum Internal

Storage

One of the following depending on model

Hot Plug LFF SAS

Hot Plug SFF SAS

Hot Plug LFF SATA

Capacity

48TB

19.2TB

48TB

Configuration

4 x 12TB

8 x 2.4TB

4 x 12TB

Hot Plug SFF SATA

16TB

8 x 2TB

Non Hot Plug LFF SATA

16TB

4 x 4TB

Hot Plug SFF SATA SSD

30.72TB

8 x 3.84TB

Hot Plug LFF SATA SSD

7.68TB

4 x 1.92GB

Required Cabling

Server Power Cords

The ProLiant ML30 server is a tower server that ships standard with a 6 country specific NEMA power cord that allows connection to wall outlets in a home or office. If customers require additional local power cords, they can check the power cord matrix for the appropriate country specific SKU.

System Fans One of the following depending on model

1P model system fan

Non-redundant Redundant

One (1) Non-redundant system fan NA

Non-redundant Redundant

1P model PCIe fan

One (1) Non-redundant PCIe fan NA

Interfaces

Video 1 (rear)

Network RJ-45 (Ethernet) 2 (1 shared for HPE Integrated Lights-Out)

Micro SD Slot 1 (internal)

NOTE: The Micro-SD slot is not a hot-pluggable device. Customers should not attempt to plug a MicroSD card into the Micro-SD slot while the server is powered.

USB 3.0 6 (4 front, 2 rear)

USB 2.0 4 (2 rear, 1 internal standard USB, 1 internal USB header)

Upgradeability

• Upgradeable to 4 cores NOTE: Total 2 or 4 cores.

• Up to 4 DIMM slots available for higher memory capacity

• Up to 8 SFF Hard Drive Bays; or 4 LFF Hard Drive Bays

• All PCIe 3.0 I/O slots for additional communications and storage expansion

• Redundant Power Supply

• Optical Drive Bay NOTE: Up to 2.

Industry Standard Compliance

• ACPI 2.0b Compliant

• PCIe 3.0 Compliant

• PXE Support

• WOL Support

• Microsoft® Logo certifications

• USB 2.0 /3.0 Support

Graphics

Integrated Matrox G200 video standard

• 1280 x 1024 (32 bpp)

• 1920 x 1200 (16 bpp)

HPE iLO 4 On System Management Memory

• 16 MB Flash

• 256 MB DDR 3 with ECC (112 MB after ECC and video) HPE NVIDIA Quadro M2000 GPU Module

HPE Server

UEFI/Legacy ROM

Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode. NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.

UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:

• Secure Boot

• Operating system specific functionality

• Support for > 2.2 TB (using GPT) boot drives

• USB 3.0 Stack

• Embedded UEFI Shell

• Mass Configuration Deployment Tool using RESTful API for iLO 4

• PXE boot support for IPv6 networks

• Boot support for option cards that only support a UEFI option ROM

• Network Stack configurations

NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.

NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your HPE ProLiant Gen9 Server.

Security

• Power-on password

• Setup password

• Power switch security

• Administrator's password

• TPM 1.2

• TPM 2.0

• UEFI

Warranty

This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of HPE Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Pointnext operational services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

NOTE: Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/.

HPC Interconnects

NOTE: High Performance Computing (HPC) interconnect technologies are available for this server under the HPE Cluster Platform product portfolio. These high-speed interconnects are fully supported by Hewlett Packard Enterprise when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPEC Clusters with InfiniBand Interconnects: https://www.hpe.com/info/hpc/solutions.

ClearOS

HPE and ClearCenter will help you lower the cost of building on-premise solutions without sacrificing security and ease of use. HPE ProLiant servers with ClearOS give you a simple, secure, and affordable operating system with an intuitive web based graphical user interface that provides a cloud-like experience on- premise, and an Application Marketplace with over 100 apps and growing. Whether you’re starting out or scaling, you decide what applications you need and pay as you grow.

One Config Simple (SCE)

SCE is a guided self-service tool to help sales and non-technical people provide customers with initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require "custom" rack configuration or configuration for products not available in SCE, please contact Hewlett Packard Enterprise Customer Business Center or an Authorized Partner for assistance. http://ocs.ext.hpe.com/.

HPE Support Services

HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability. Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster. HPE Support Services enable you to choose the right service level, length of coverage and response time as you purchase your new server, giving you full entitlement to the support for need for your IT and business.

Connect your devices

Unlock all of the benefits of your technology investment by connecting your products to Hewlett Packard Enterprise. Achieve up to 77%¹ reduction in down time, near 100%² diagnostic accuracy and a single consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre-failure alerts, automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and HPE Datacenter Care Service customers will also benefit from proactive activities to help prevent issues and increase optimization. All of these benefits are already available to you with your server storage and networking products, securely connected to Hewlett Packard Enterprise support.

NOTE:¹- IDC

NOTE: ² – HP CSC reports 2014 - 2015

Recommended Support

Basic: HPE Foundation Care NBD, three-year Support Service

HPE Foundation Care Next Business Day connects you to Hewlett Packard Enterprise during business hours for assistance on resolving issues – This service features need based next business day hardware onsite response and software call back within two hours. In addition, Collaborative software support and provides troubleshooting assistance on industry leading software running on your HPE server. Simplify your support experience and make Hewlett Packard Enterprise your first call to help resolve hardware or software problems. https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en

Standard: HPE Foundation Care 24x7, three-year Support Service

HPE Foundation Care 24x7 gives you access to Hewlett Packard Enterprise 24 hours a day, seven days a week for assistance on resolving issues. This service includes need based Hardware onsite response within four hours. In addition, collaborative software support is included in this service that provides troubleshooting assistance on industry leading software running on your HPE server. Simplify your support experience and make Hewlett Packard Enterprise your first call to help resolve hardware or software problems.

https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en

Optimized: HPE Proactive Care* with 24x7 coverage, three year Support Service

HPE Proactive Care gives customers an enhanced call experience. When your products are connected to Hewlett Packard Enterprise, Proactive Care helps prevent problems and maintains IT stability by utilizing personalized proactive reports with recommendations and advice. This service combines three years proactive reporting and advice with our 24x7 coverage, four hour hardware response time when there is a problem. This service also includes collaborative software support for Independent Software Vendors (ISVs), (Red Hat, VMWare, Microsoft, etc.) running on your HPE servers.

Parts and Materials

Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements.

Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as part of these services.

The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by Hewlett Packard Enterprise due to malfunction.

Entry Models

Performance Models

Solution Models

[SKU Number]

P03704-XXX

P03705-XXX

P03706-XXX

P03707-XXX

Model Name

HPE ProLiant ML30

Gen9 E3-1220v6 1P

8GB-U B140i 4LFF

NHP SATA 350W PS

Entry Server

HPE ProLiant ML30

Gen9 E3-1220v6 1P

8GB-U B140i 4LFF

HP SATA 350W PS

Perf Server

HPE ProLiant ML30

Gen9 E3-1230v6 1P

8GB-U B140i 4LFF HP

SATA 460W RPS Perf

Server

HPE ProLiant ML30 Gen9 E3-1240v6 1P 8GB-U

B140i 8SFF SATA 460W

RPS Perf Server

Processor

Intel® Xeon® E31220v6

Intel® Xeon® E31220v6

Intel® Xeon® E31230v6

Intel® Xeon® E3-1240v6

Number of Processors

One

Memory

8GB (1x8GB UDIMMs,

2400 MHz)

8GB (1x8GB UDIMMs,

2400 MHz)

8GB (1x8GB UDIMMs,

2400 MHz)

16GB (1x16GB UDIMMs,

2400 MHz)

Network Controller

Broadcom 5720 Dual-port 1GbE

Storage Controller

HPE Dynamic Smart

Array B140i with 4

SATA ports support

HPE Dynamic Smart Array B140i with 4 SATA ports support

NOTE: Field upgradeable to SAS support by selecting an HPE SAS Controller or Smart HBA.

HPE Dynamic Smart Array B140i with 4 SATA ports support

NOTE: Field upgradeable to SAS/8 ports support by selecting an HPE SAS

Controller or Smart HBA.

Network Controller

Broadcom 5720 Dual-port 1GbE

Storage Controller

HPE Dynamic Smart Array B140i

Hard Drive

None ship standard; includes 3 LFF hard drive blanks

None ship standard; includes 7SFF hard drive blanks

Internal Storage

4 LFF HDD Bays

(Non Hot Plug)

4 LFF HDD Bays (Hot Plug)

8SFF HDD Bays (Hot Plug)

Optical Drive Bay

1 (Optional: DVD-

ROM, DVD-RW)

1 (Optional: DVD-ROM, DVD-RW)

1 (Optional: DVD-ROM,

DVD-RW)

Optical Drive

None

1 DVD RW

None

PCI-Express Slots

4 PCIe 3.0 slots

Power Supply

(1) 350W ATX Power Supply

(1) 460W Redundant Power Supply

Fans

1 non hot plug, non-redundant

Management

iLO Management (standard), Intelligent Provisioning (standard), iLO Essentials (optional), iLO Scale-out (optional only for DL), iLO Advanced (optional)

Form Factor

Tower (4U)

Warranty

Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day response.

Country Code Key

xx1 = B21

Worldwide

xx1 = S01

US

xx1 = S05

BZ

xx1 = 425

EU/UK

xx1 = 375

AP

xx1 = 291

Japan

[Chassis]

HPE ProLiant ML30 Gen9 Non-hot Plug 4LFF Configureto-order Server

HPE ProLiant ML30 Gen9 Hot Plug 4LFF Configure-toorder Server

HPE ProLiant ML30 Gen9 Hot Plug 8SFF Configure-toorder Server

SKU Number

823401-B21

823402-B21

823403-B21

Processor

1

1

1

DIMM Slots

4 DIMM slots for UDIMM DDR4 Memory

Storage Controller

HPE Dynamic Smart Array B140i with 4 SATA ports support

HPE Dynamic Smart Array B140i with 4 SATA ports support, choice of HPE SAS Controller or Smart HBA

PCIe

4 PCIe 3.0 slots

Drive Cage

4LFF Non Hot Plug

4LFF Hot Plug

8SFF Hot Plug

Network Controller

Broadcom 5720 Dual-port 1GbE

Fans

1 non hot plug, non-redundant

Management

iLO Management (standard), Intelligent Provisioning (standard)

USB

4 front, 4 rear, 2 internal

HPE Processors

HPE Memory

Select one processor from Core Options-Processor section below.

• Select one xxxxxx-L21.

• Only one processor supported.

• DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.

For the Intel® C236 Chipset E3-1200 Series, the letter preceding the model number indicates the Product Line (E3, E5, E7); 1200x v#, 1 is the number of CPU, 2 is socket type/segment designation, 00 = Processor SKU, x = L for low power SKUs and v# (not yet designated) is the version number

Select one or more types of memory from Core Options-Memory section below.

• HPE memory from previous generation servers is not qualified or warranted with this HPE ProLiant Server.

• HPE Standard Memory (UDIMM) is required to realize the memory performance improvements and enhanced functionality listed in this document for this HPE ProLiant Server.

• With one processor installed, four DIMMs slots are available.

• Depending on the memory configuration and processor model, the memory speed would run at 2133MHz. Please see Memory Population Table or the Online Memory Configuration Tool at: http://www.hpe.com/servers/ddr4memoryconfig.

Page 15

HPE Unique Options

Select one or more Unique options from Core Options section below.

• This section may contain FIO options, please see the Unique options section below.

• FIO indicates that this option is only available as a factory installable option.

HPE Drives

Select one or more drives from Core Options-HPE Drives section below.

• The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.

• Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

• The HPE ProLiant Gen9 Smart Storage solutions are equipped with re-designed Small Form Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug carriers for HPE Qualified Hard Drives and Solid State Drives. These new carriers provide status and activity indicators as well as caution indicators for "Do Not Remove."

HPE Graphics Options

Select one or more graphics adapter from Additional Options section below.

• Please see the HPE Power Advisor for estimated power consumption of your individual system configuration prior to installing GPUs. The HPE Power Advisor is located at: http://www.hpe.com/info/hppoweradvisor.

• This section may contain FIO options, please see HPE Computation & Graphics Accelerators section below.

HPE Networking

Select a standup NIC adapter from Core Options-Networking section below.

• These options are upgradeable and can be changed from the original configuration after the server is shipped.

• For 10Gb adapters, a minimum of two Gigabytes (2 GB) of server memory is required per each adapter.

HPE Cooling Options

Select one or more Fan Kits from Core Options section below.

• This section may contain FIO options, please see HPE Cooling Options section below.

• FIO indicates that this option is only available as a factory installable option.

HPE Storage Controllers

Select one or more Storage options from Additional Options section below.

• The embedded B140i controller will operate in UEFI only mode. For legacy support an additional controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.

• This section may contain FIO options, please see HPE Storage Controllers section below.

• FIO indicates that this option is only available as a factory installable option.

HPE Memory

Unbuffered DIMMs (UDIMMs)

HPE 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Unbuffered Standard Memory Kit

862974-B21

HPE 8GB (1x8GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Unbuffered Standard Memory Kit

819880-B21

HPE 16GB (1x16GB) Dual Rank x8 DDR4-2400 CAS-17-17-17 Unbuffered Standard Memory Kit

862976-B21

HPE 16GB (1x16GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Unbuffered Standard Memory Kit

NOTE: The following memory is supported by the E3-1200v6 series, i3-7000 series, G4560 and G4600 processors only.

805671-B21

HPE Optical Drives

HPE 9.5mm SATA DVD-ROM Optical Drive

726536-B21

HPE 9.5mm SATA DVD-RW Optical Drive

726537-B21

HPE 900GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD

HPE 600GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD

870759-B21

872477-B21

HPE 300GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD

HPE 300GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware

HDD

NOTE: User may select any combination of SAS or SATA Hard Drives.

SAS drives require the selection of a SAS controller. See card lists in Controllers section. If B140i is the primary controller, user can only select SATA drives.

SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives

HPE 2TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e HDD

HPE 1TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally Signed Firmware HDD

NOTE: User may select any combination of SAS or SATA Hard Drives. SAS drives require the selection of a SAS controller. See card lists in Controllers section. If B140i is the primary controller, user can only select SATA drives.

SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HPE 10TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium 512e Digitally Signed Firmware HDD

HPE 8TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e Digitally Signed Firmware

HDD

HPE 6TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e HDD

HPE 6TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally Signed Firmware HDD

HPE 4TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally Signed Firmware HDD HPE 2TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally Signed Firmware HDD

870753-B21

872475-B21

765466-B21

832514-B21

857644-B21

819201-B21

861754-B21

846514-B21

872487-B21

872485-B21

HPE 1TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally Signed Firmware HDD

846524-B21

NOTE: User may select any combination of SAS or SATA Hard Drives. SAS drives require the selection of a SAS controller. See card lists in Controllers section. If B140i is the primary controller, user can only select SATA drives.

12G SAS Hot Plug SFF (2.5-inch) Write Intensive Solid State Drives

HPE 400GB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

P04541-B21

12G SAS Hot Plug SFF (2.5-inch) Mixed Use Solid State Drives

HPE 400GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

P09088-B21

HPE 400GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

P04525-B21

SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives

HPE 2TB SATA 6G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e Digitally Signed Firmware HDD

765455-B21

HPE 1TB SATA 6G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally Signed Firmware HDD

655710-B21

NOTE: User may select any combination of SAS or SATA Hard Drives. SAS drives require the selection of a SAS controller. See card lists in Controllers section. If B140i is the primary controller, user can only select SATA drives.

SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HPE 1TB SATA 6G Midline 7.2K LFF (3.5in) RW 1yr Wty HDD

801882-B21

HPE 4TB SATA 6G Midline 7.2K LFF (3.5in) RW 1yr Wty HDD

801888-B21

HPE 12TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium 512e Digitally Signed Firmware HDD

HPE 10TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium 512e Digitally Signed Firmware HDD

HPE 8TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e Digitally Signed Firmware HDD

HPE 6TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e HDD

HPE 4TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally Signed Firmware HDD

HPE 2TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally Signed Firmware HDD

HPE 1TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty HDD

6G SATA Hot Plug SFF (2.5-inch) Read Intensive Solid State Drives

HPE 3.84TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware

SSD

HPE 1.92TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

HPE 240GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

Read Intensive - 6G SATA - M.2 - Solid State Drives

HPE 480GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally Signed Firmware SSD

881785-B21

857648-B21

819203-B21

861750-B21

872491-B21

872489-B21

861691-B21

P06200-B21

P06198-B21

P06196-B21

P06194-B21

875503-B21

875498-B21

6G SATA Hot Plug SFF (2.5-inch) Mixed Use Solid State Drives

HPE 1.92TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

P09722-B21

HPE 960GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

P09716-B21

HPE 480GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

P09712-B21

6G SATA Hot Plug LFF (3.5-inch) Read Intensive Solid State Drives

HPE 1.92TB SATA 6G Read Intensive LFF (3.5in) SCC 3yr Wty Digitally Signed Firmware SSD

P09693-B21

HPE 960GB SATA 6G Read Intensive LFF (3.5in) SCC 3yr Wty Digitally Signed Firmware SSD

P09689-B21

HPE 480GB SATA 6G Read Intensive LFF (3.5in) SCC 3yr Wty Digitally Signed Firmware SSD

P09687-B21

6G SATA Hot Plug LFF (3.5-inch) Mixed Use Solid State Drives

HPE 1.92TB SATA 6G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally Signed Firmware SSD

P09724-B21

Mixed Use - 6G SATA - M.2 - Solid State Drives

HPE 480GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD

875490-B21

HPE 240GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD

875488-B21

Hard Drive Kits

HPE Large Form Factor Hard Drive Blank Kit

666986-B21

HPE Small Form Factor Hard Drive Blank Kit

666987-B21

HPE ML10v2 Drive Enablement Kit

812248-B21

NOTE: Compatible with all chassis and supports NHP LFF Hard Disk. If ATX PSU is

HPE Networking

1 Gigabit Ethernet adapters

HPE Ethernet 1Gb 4-port 331T Adapter

647594-B21

HPE Ethernet 1Gb 4-port 366T Adapter

811546-B21

HPE Ethernet 1Gb 2-port 332T Adapter

615732-B21

HPE Ethernet 1Gb 2-port 361T Adapter 10 Gigabit Ethernet adapters

652497-B21

HPE Ethernet 10Gb 2-port 530SFP Adapter

652503-B21

HPE Ethernet 10Gb 2-port 530T Adapter

656596-B21

HPE Ethernet 10Gb 2-port 560SFP+ Adapter

665249-B21

HPE Ethernet 10Gb 2-port 561T Adapter

716591-B21

NOTE: Max=1 if selected with another x8 device.

HPE Computation and Graphics Accelerators

HPE NVIDIA Quadro P2000 Graphics Accelerator

HPE AMD Radeon Pro WX2100 Graphics Accelerator

Q0V77A

Q1P47C

Embedded Management

HPE iLO Advanced

HPE iLO Advanced 1-server License with 1yr Support on iLO Licensed Features

512485-B21

HPE iLO Advanced 1-server License with 3yr Support on iLO Licensed Features

BD505A

HPE iLO Advanced Flexible Quantity License with 3yr Support on iLO Licensed Features

BD506A

HPE iLO Advanced AKA Tracking License with 3yr Support on iLO Licensed Features

BD507A

HPE iLO Advanced Electronic License with 1yr Support on iLO Licensed Features

E6U59ABE

HPE iLO Advanced Electronic License with 3yr Support on iLO Licensed Features HPE iLO Essentials

E6U64ABE

HPE Security

HPE Trusted Platform Module 2.0 Kit

NOTE: HPE Trusted Platform Module 2.0 Option works with Gen9 servers with UEFI Mode not Legacy Mode. It is not compatible with HPE ProLiant Gen8 servers or earlier generation variants.

NOTE: HPE Gen9 servers purchased earlier may need the latest firmware update to be compatible with the TPM 2.0 Option.

NOTE: HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced with any other TPM module.

745823-B21

HPE Smart Host Bus Adapters

HPE H241 12Gb 2-ports Ext Smart Host Bus Adapter

726911-B21

NOTE: Max=1.

HPE H240 12Gb 2-ports Int Smart Host Bus Adapter

NOTE: Device Count - This controller can support up to 8 internal SAS/SATA devices.

NOTE: Must select Mini SAS H240 Cable Kit (789648-B21) x1 for 4LFF model. NOTE: Must select Mini SAS H240 Cable Kit (789648-B21) x2 for 8SFF model.

726907-B21

Tape Drives

HPE LTO-7 Ultrium 15000 Internal Tape Drive

HPE StoreEver LTO-7 Ultrium 15000 External Tape Drive

HPE StoreEver MSL LTO-7 Ultrium 15000 SAS Drive Upgrade Kit

HPE StoreEver LTO-6 Ultrium 6250 External Tape Drive

HPE LTO-6 Ultrium 6250 Internal Tape Drive

HPE StoreEver MSL LTO-6 Ultrium 6250 SAS Drive Upgrade Kit HPE StoreEver LTO-5 Ultrium 3000 SAS External Tape Drive

BB873A

BB874A

N7P37A

EH970A

EH969A

C0H27A

EH958B

Page 21

HPE StoreEver MSL LTO-5 Ultrium 3000 SAS Drive Upgrade Kit

HPE StoreEver LTO-5 Ultrium 3000 SAS Internal Tape Drive

HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 2m Cable

HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 4m Cable HPE ML30 Gen9 Tape Drive Cable Kit

NOTE: Required per RDX/LTO internal disk backup system if selected together with

350W ES1.0 or ES2.0 power supply.

BL540B

EH957B

K2R09A

K2R10A

851615-B21

NOTE: HPE ML30 Gen9 server requires HPE ML30 Gen9 Tape Drive Cable Kit (851615-B21) for internal tape drive support.

HPE DAT Autoloader

HPE MSL2024 Tape Library

HPE StoreEver MSL2024 0-drive Tape Library

AK379A

HPE MSL4048 Tape Library

HPE Disk Backup

HPE RDX Removable Disk Backup System

HPE RDX 1TB Internal Disk Backup System

B7B67A

HPE RDX 1TB External Disk Backup System

B7B69B

HPE RDX Internal Docking Station

C8S06A

HPE RDX External Docking Station

C8S07B

HPE RDX 2TB Internal Disk Backup System

E7X52A

HPE RDX 2TB External Disk Backup System

E7X53B

HPE RDX 4TB Internal Disk Backup System

Q2R32A

HPE RDX 4TB External Disk Backup System

NOTE: HPE ML30 Gen9 server requires HPE ML30 Gen9 Tape Drive Cable Kit (851615B21) for internal tape drive support.

NOTE: For the complete range of RDX drives and media see:

https://www.hpe.com/us/en/product-catalog/storage/disk-based-backupsystems.html. For hardware and software compatibility of HPE disk backup products see: http://www.hpe.com/storage/spock.

NOTE: Please see the HPE RDX Removable Disk Backup System QuickSpecs for additional part numbers, technical specifications, and additional information.

Q2R33A

HPE Uninterruptible NOTE: To learn more, please visit the HPE Uninterruptible Power Systems (UPS) web

Power Systems page.

(UPS)

HPE USB and SD HPE Enterprise Mainstream Flash Media Kits for Memory Cards Options HPE 32GB microSD Flash Memory Card

700139-B21

HPE 8GB microSD Flash Memory Card

726116-B21

HPE 8GB microSD Flash USB Drive

737953-B21

HPE 8GB Dual microSD Flash USB Drive

741279-B21

HPE Support Services

Installation & Start-up Services

HPE Installation ML/DL Series 10 Service

U7WZ5E

HPE Startup ML/DL Series 10 Service

U7WZ7E

Foundation Care

HPE 3 year Foundation Care Next business day ML30 Gen9 Service

HPE 3 year Foundation Care Next business day with DMR ML30 Gen9 Service

HPE 3 year Foundation Care 24x7 ML30 Gen9 Service

HPE 3 year Foundation Care 24x7 with DMR ML30 Gen9 Service

HPE 3 year Foundation Care Next business day with CDMR ML30 Gen9 Service

HPE 3 year Foundation Care 24x7 with CDMR ML30 Gen9 Service

Proactive Care

HPE 3 year Proactive Care 24x7 ML30 Gen9 Service

HPE 3 year Proactive Care 24x7 with DMR ML30 Gen9 Service

HPE 3 year Proactive Care 24x7 with CDMR ML30 Gen9 Service NOTE: For a full list of packaged support services, please visit http://www.hpe.com/services/ssc.

H1AS0E

H1AS1E

H1AS6E

H1AS7E

H1AX4E

H1AX7E

H1AS8E

H1AS9E

H1AX8E

Page 23

Memory Bandwidth and Capacity

[DIMM Type]

Unbuffered with ECC DIMMs (UDIMMs)

HPE SKU P/N

819880-B21

805671-B21

862974-B21

862976-B21

DIMM Rank

Single Rank

Dual Rank

Single Rank

Dual Rank

DIMM Capacity

8GB

16GB

8GB

16GB

Voltage

Std Voltage 1.2V

Std Voltage 1.2V

Std Voltage 1.2V

Std Voltage 1.2V

DIMM Native Speed (MT/s)

2133

2133

2400

2400

SLOTS THAT CAN BE PO

PULATED

4 slot servers

4

4

4

4

MAXIMUM CAPACITY (G

B)

32

64

32

64

POPULATED DIMM SPEE

D (MT/s)

1 DIMM Per Channel

2133

2133

2400

2400

2 DIMM Per Channel

2133

2133

2400

2400

Processor Models

Supported Memory Speeds

E3-1220v5, E3-1230v5, E3-1240Lv5, E3-1240v5, E3-1270v5, i3-6300, i3-6100, G4400, G4500

2133MT/s

E3-1220v6, E3-1230v6, E3-1240v6, E3-1270v6, E3-1278v6, i3-7300, i3-7100, G4560, G4600

2400MT/s

Pre-Configured Models

Standard Memory

Maximum Memory Plus Optional Memory

Standard Memory

Replaced with Optional Memory

E3-1240v5

8GB (1x8GB)

56GB (3x16GB, 1x8GB)

64GB (4x16GB)

E3-1220v5

4GB (1x4GB)

52GB (3x16GB, 1x4GB)

64GB (4x16GB)

E3-1240v6

8GB (1x8GB)

56GB (3x16GB, 1x8GB)

64GB (4x16GB)

E3-1220v6

8GB (1x8GB)

56GB (3x16GB, 1x8GB)

64GB (4x16GB)

System Unit

Tower Dimensions

(H x W x D)

Tower Weight

Input Requirements

BTU Rating

Power Supply Output

System Inlet Temperature

Relative Humidity

Altitude

Acoustic Noise

14.50 x 6.89 x 18.7 in (36.82 x 17.5 x 47.52 cm)

Minimum: 27.1lb(13.56kg)

Maximum: 30.8lb(15.4kg)

Range Line Voltage 100 to 120 VAC

Rated Input Current 2.5 to 6 Amps Rated Input Frequency

Range Line Voltage 47 to 63 Hz

Rated Input Current 412W to 526W at 115 V AC input

412W to 523W at 230 V AC input

Maximum 460W - 1773 BTU / hr (at 120 VAC), 1715 (at 240 VAC)

Rated Steady-State 350 W (at 115 VAC)

Power 350 W (at 230 VAC)

Maximum Peak Power 350 W (at 115 VAC)

350 W (at 230 VAC)

Standard Operating 10° to 35°C (50° to 95°F) at sea level with an

Support altitude derating of 1.0°C per every 304.8 m (1.8°F per every 1000 ft) above sea level to a maximum of 3048 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F).

Non-operating -30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).

Operating 10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature.

Non-operating 5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, noncondensing.

Operating 3048 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min).

Non-operating 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).

Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).

Idle

LWAd 4.2 Bels (1P LFF Base)

3.7 Bels (1P LFF Performance)

LpAm 27 dBA (1P LFF Base)

23 dBA (1P LFF Performance)

Page 29

08-Jul-2016

Version 7

Changed

Smart Buy models section was revised for the NA version only.

06-Jun-2016

Version 6

Added

Added new HDD offering to the HPE Drives section.

08-Apr-2016

Version 5

Changed

HPE Processors section was revised.

31-Mar-2016

Version 4

Added

Added new HPE TMP 2.0 module, and new RDX Disk Backup Systems.

Changed

Embedded Management, Security, Service and Support, and Pre-configured Models sections were revised.

Removed

Obsolete SKUs were removed from the QuickSpecs.

16-Feb-2016

Version 3

Added

New HDD offering was added to HPE Drives.

Changed

HPE Unique Options and HPE Tape Backup were revised.

Removed

Obsolete SKUs were removed from the QuickSpecs.

17-Dec-2015

Version 2

Added

Smart Buy models were added to the NA version.

Changed

Chipset, Pre-configured Models, HPE Drives, HPE Power Supplies, HPE Tape Backup, Maximum Storage Capacity, and Technical Specifications were revised.

01-Dec-2015

Version 1

New

New QuickSpecs.